
Comix-35
schlae/comix-35
The COMIX-35 is an improved clone of the COMX-35 1802 home computer

A 75% Mechanical Keyboard, custom built from scratch.
Keyboard is an open-source printed circuit board by arnav-kr, from the arnav-kr/AnnovaX75 repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 323.9 × 131 mm with 173 parts on 116 nets, routed with 576 tracks and 6 vias.
Its parts include 83 diodes, 83 switches, 2 connectors and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
A 75% Mechanical Keyboard, custom built from scratch.

The PCB is designed to be compatible with Cherry MX switches and features hot-swappable kalih sockets.
| Schematics |
|---|
| PCB (All Layers) |
|---|
| PCB (Front Layer) |
|---|
| PCB (Back Layer) |
|---|
| PCB Render (Front) |
|---|
![]() |
| PCB Render (Back) |
|---|
![]() |
The case is designed to be 3D printed and features a sandwich mount design with a 6° typing angle. The bottom case, top case, plate, and knob are all designed to be printed.
| Case Full |
|---|
![]() |
| Case Top |
|---|
![]() |
| Plate |
|---|
![]() |
| Case Bottom |
|---|
![]() |
![]() |
| Knob |
|---|
![]() |
for detailed bom check out BOM.csv
Cost is as of 28/12/2025
This project is licensed under the AGPL-3.0 License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 83 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +67 |
| 71 | SW_Push | Switch_MX_Hotswap:SW_Hotswap_Kailh_MX_Plated_1.00u_With_Switch | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24 +55 |
| 3 | SW_Push | Switch_MX_Hotswap:SW_Hotswap_Kailh_MX_Plated_1.25u_With_Switch | SW74, SW75, SW76 |
| 3 | Stabilizer_Cherry_MX_2.00u | Stabilizer_MX:Stabilizer_Cherry_MX_2.00u | ST29, ST58, ST60 |
| 2 | SW_Push | Switch_MX_Hotswap:SW_Hotswap_Kailh_MX_Plated_1.75u_With_Switch | SW46, SW71 |
| 2 | SW_Push | Switch_MX_Hotswap:SW_Hotswap_Kailh_MX_Plated_2.25u_With_Switch | SW58, SW60 |
| 2 | SW_Push | Switch_MX_Hotswap:SW_Hotswap_Kailh_MX_Plated_1.50u_With_Switch | SW31, SW44 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_THT | U1 |
| 1 | RotaryEncoder_Switch | Keyboard_Components:Encoder_EC11_MX_Combo | SW15 |
| 1 | SW_Push | Switch_MX_Hotswap:SW_Hotswap_Kailh_MX_Plated_6.25u_With_Switch | SW77 |
| 1 | SW_Push | Switch_MX_Hotswap:SW_Hotswap_Kailh_MX_Plated_2.00u_With_Switch | SW29 |
| 1 | Stabilizer_Cherry_MX_6.25u | Stabilizer_MX:Stabilizer_Cherry_MX_6.25u | ST77 |

schlae/comix-35
The COMIX-35 is an improved clone of the COMX-35 1802 home computer

nicolacimmino/PLC-14500
Retro trainer board based on the MC14500 1-bit ICU. The project is OSHW certified and a ready to assemble kit is available on Tindie.

yiancar/gingham_usbc_pcb
A 60% throughole keyboard with USBC. Inspired by the Plaid

schlae/HardDriveInfo
Repair info and schematics for mostly older MFM hard drives

96boards/mezzanine-community
Repository for community designed mezzanine boards for the 96boards specification.



DragonMinded/minidragon
Hardware and software files for the MiniDragon CPU.
It measures 323.9 × 131 mm and has 2 copper layers, 1.6 mm thick.
173 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the arnav-kr/AnnovaX75 repository on GitHub, at the commit this page was made from: the board is PCB/keyboard.kicad_pcb and its schematic PCB/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).