Skip to the content
2 layers42 × 68.3 mmScart to rca 1, the printed circuit board in 3D

Simple SCART to RCA Board, v0.1 untested.

Size
42 × 68.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
18
Pads
38
Tracks, vias
46, 0
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
8 Jun 2018
Updated
8 Jun 2018

Overview

Scart to rca 1 is an open-source printed circuit board by arithmaldor, from the arithmaldor/SCART-to-RCA repository on GitHub. It is a 2-layer board of 42 × 68.3 mm with 6 parts on 18 nets, routed with 46 tracks and 0 vias.

README

README.md

Copyright and Disclaimer

Copyright: Jacob Proctor 2018

This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.

You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions

SCART to RCA Board

The goal of this project was to make an affordable open-source way to connect SCART cables to PVMs' or Crosspoint Switches. This is designed so that the cables will be in line, and you can mount multiple of these boards in a row for crosspoint switches. Use with either RCA cables and RCA female to male BNC adapters or RCA male to BNC female adapters and BNC cables. Use high quality adapters and cables for best results.

Parts

SCART Connector: K-SCARTX-024, available on Mouser

RCA Connector: PJRAS3X2S01 is available on Mouser and Digikey, but the colors are wrong. Here are the ones I used, a bit cheaper per part:

https://www.ebay.com/itm/QTY-10-6-WAY-PCB-FEMALE-RCA-JACKS-GREEN-YELLOW-BLUE-WHITE-RED-RED-RCA-268N1-14/112220720415?var=null

Mounting hole size is M3, can be used with motherboard standoffs for mounting on MDF or acrylic or something else.

Price Breakdown

$7.45 per board from OSHPark

$1.00 per RCA connector

$2.50 per SCART connector

Total per board: ~$11

Version 0.1

This board is untested, I will probably be ordering a few soon after which I will update the version number to 1.0 if everything works out.

OSHPark

https://oshpark.com/shared_projects/7CGRR3nm

Parts

6
QtyValueFootprintReferences
4Conn_01x01Mounting_Holes:MountingHole_3.2mm_M3J1, J2, J3, J4
13x2_RCASCARTConnectors:3x2_RCARCA1
1SCART-FSCARTConnectors:SCART_FSCART1

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the Scart to rca 1 PCB?

It measures 42 × 68.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Scart to rca 1 use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Scart to rca 1 KiCad files?

From the arithmaldor/SCART-to-RCA repository on GitHub, at the commit this page was made from: the board is scart to rca 1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Scart to rca 1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask arithmaldor before reusing the design.