2 layers308.7 × 241.8 mm
OTTOtact
cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.
229 parts49GPL-3.0
2 layers44.5 × 21 mm
Mt3608 Boost Converter
ArifRahmanEEE/IOT- Size
- 44.5 × 21 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 11
- Pads
- 49
- Tracks, vias
- 57, 83
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Aug 2024
- Updated
- 11 Dec 2024
Overview
Mt3608 Boost Converter is an open-source printed circuit board by ArifRahmanEEE, from the ArifRahmanEEE/IOT repository on GitHub. It is a 2-layer board of 44.5 × 21 mm with 25 parts on 11 nets, routed with 57 tracks and 83 vias.
It is built around the MT3608 and SS34. Its parts include 10 capacitors, 5 connectors, 4 diodes, 2 resistors and 1 IC. It belongs with the power boards of this library.
Main components
2Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10u | Capacitor_SMD:C_1206_3216Metric | C3, C4, C5, C6, C7, C8, C9, C10 |
| 4 | ss34 | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1, D2, D3, D4 |
| 2 | FB | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P2.54mm_Vertical_Vishay_IM-1 | FB1, FB2 |
| 2 | R | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 220uF/16V | Capacitor_SMD:CP_Elec_8x10 | C1 |
| 1 | GND(IN) | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J2 |
| 1 | GND(out) | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J5 |
| 1 | L_Ferrite | Inductor_SMD:L_Taiyo-Yuden_NR-60xx_HandSoldering | L1 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | IC1 |
| 1 | V+(IN) | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J1 |
| 1 | V+(out) | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J3 |
| 1 | V-(out) | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J4 |
Questions
How big is the Mt3608 Boost Converter PCB?
It measures 44.5 × 21 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mt3608 Boost Converter use?
25 parts, built around the MT3608 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mt3608 Boost Converter KiCad files?
From the ArifRahmanEEE/IOT repository on GitHub, at the commit this page was made from: the board is MT3608 (Boost Converter) Symmetrical/mt3608 Boost Converter.kicad_pcb and its schematic MT3608 (Boost Converter) Symmetrical/mt3608 Boost Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mt3608 Boost Converter design in my own project?
Its repository states no licence, so its author keeps all rights: ask ArifRahmanEEE before reusing the design.
Similar boards
- 2 layers79.2 × 68.8 mm
Environment slave
pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!
72 parts30MIT - 4 layers83 × 83 mm
PWNSAT
Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research
139 parts29 - 2 layers60 × 40 mm
Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 2 layers77.2 × 67.9 mm
Transistor tester
vitaliy-bobrov/avr-transistor-tester
Component/Transistor tester based on famous AVR Transistor Tester
66 parts12 - 2 layers61 × 61 mm
ESP32 FC
MAATHES-THILAK-K/ESP32-S3_FLIGHT_CONTROLLER
A custom-designed flight controller based on the ESP32-S3 module, built for compatibility with the esp-fc firmware and Betaflight-like configuration.
69 parts7Apache-2.0 - 4 layers100 × 80 mm
Plc board
denorath-sys/gridnet
Open hardware powerline mesh communication terminal
62 parts5CERN-OHL-W-2.0 - 2 layers65 × 56.5 mm
PiSupply
enwi/PiSupply
Uninterruptable power supply for Raspberry Pi's, which can also power external HDDs
80 parts4LGPL-3.0