2 layers40 × 20 mm
2 layers
ProMicro Build
ArgGrr/SmartportSD2Fork of SmartportSD with some improvements/tweaking
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 24
- Pads
- 79
- Tracks, vias
- 121, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Jul 2020
- Updated
- 3 Jan 2021
Overview
ProMicro Build is an open-source printed circuit board by ArgGrr, from the ArgGrr/SmartportSD repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 13 parts on 24 nets, routed with 121 tracks and 0 vias.
Its parts include 7 resistors, 4 connectors, 1 diode and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdSmartportSD
Fork of SmartportSD by Andrea Ottaviani which is a port of Apple //c Smartport Compact Flash adpater by Robert Justice. Original source: http://www.users.on.net/~rjustice/SmartportCFA/SmartportSD.htm Added here for convenience, not intending to take over the project!
I have added some code to support a small OLED display to show some information, rework the code a little for better or worse.
Includes a 3d printable DB15 plug housing for the smartport. You will need some real pins.
Also includes a work in progress case that somewhat looks like a 3.5 inch unidisk drive, from pictures anyway.
To build you'll need to install the U8g2 library from Arduino Library Manager. I am using the following screen: Geekcreit 0.91 Inch 128x32 IIC I2C Blue OLED Display DIY Oled Module SSD1306 Driver.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5 |
| 2 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J2LH1, J2RH1 |
| 1 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | Apple 2 Drive Port | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J4 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | QDtech_1.8inch_SPI_MSP1804 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1 |
Questions
What parts does the ProMicro Build use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ProMicro Build KiCad files?
From the ArgGrr/SmartportSD repository on GitHub, at the commit this page was made from: the board is Schematic/SmartportSD-1.15/ProMicro Build/ProMicro Build.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ProMicro Build design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0