2 layers148 × 84.5 mm
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
259 parts410
2 layers260.7 × 166.7 mm
MacroAll
arborium-dev/macroAllsplit keyboard but with too many dials and buttons
- Size
- 260.7 × 166.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 259
- Nets
- 173
- Pads
- 1,214
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Oct 2025
- Updated
- 9 Nov 2025
Overview
MacroAll is an open-source printed circuit board by arborium-dev, from the arborium-dev/macroAll repository on GitHub. It is a 2-layer board of 260.7 × 166.7 mm with 259 parts on 173 nets.
Its parts include 118 diodes, 118 switches, 4 resistors and 2 ICs. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.
README
README.mdmacroAll
Parts
259| Qty | Value | Footprint | References |
|---|---|---|---|
| 118 | D | Diode_SMD:D_SOD-123 | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D113 +102 |
| 118 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1 | SW1, SW10, SW11, SW100, SW101, SW102, SW103, SW104, SW105, SW106, SW107, SW108, SW109, SW110, SW111, SW113 +102 |
| 10 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10 |
| 3 | breakoff | PanelizationPretty:mouse-bite-5mm-slot | H11, H12, H13 |
| 2 | 2M | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 806k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | BAT | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2 |
| 2 | GND | TestPoint:TestPoint_Pad_D2.0mm | TP3, TP4 |
| 2 | XIAO-nRF52840-Plus-SMD | OPL:XIAO-nRF52840-Plus-SMD | U22, U23 |
Questions
How big is the MacroAll PCB?
It measures 260.7 × 166.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MacroAll use?
259 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MacroAll KiCad files?
From the arborium-dev/macroAll repository on GitHub, at the commit this page was made from: the board is macroAll/macroAll.kicad_pcb and its schematic macroAll/OPL_Kicad_Library-master/OPL_Kicad_Library-master/Grove Vision AI V2 Library/Grove - Vision AI Module V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MacroAll design in my own project?
Its repository states no licence, so its author keeps all rights: ask arborium-dev before reusing the design.
Similar boards
- 2 layers97 × 97 mm
- 2 layers100 × 70 mm
- 2 layers285 × 94.6 mm
- 2 layers100 × 100 mm
Trv
Polski-Zwiazek-Krotkofalowcow/qo-100-transverter
Auxiliary unit for the QO-100 transverter, providing:
259 parts11 - 2 layers478 × 183 mm
- 2 layers100 × 100 mm
Hdmilight v3
esar/hdmilight-v3
HDMI Light v3 - FPGA based Ambilight clone with direct HDMI input
259 parts8GPL-2.0 - 2 layers263.1 × 80.5 mm
