Skip to the content
2 layers62.6 × 63.4 mmHexPad, the printed circuit board in 3D

This is a hackpad project with 6 keys. Almost everything in the cad file for this project is customizable. You can add as many keys as you want, change the dimensions of the usb c port, the inside dimensions, the wall dimensions, and basically everything else.

Size
62.6 × 63.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
14
Pads
55
Tracks, vias
101, 6
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Mar 2026
Updated
13 Apr 2026

Overview

HexPad is an open-source printed circuit board by araschke001-commits, from the araschke001-commits/HexPad repository on GitHub. It is a 2-layer board of 62.6 × 63.4 mm with 9 parts on 14 nets, routed with 101 tracks and 6 vias.

Its parts include 7 switches, 1 IC and 1 connector.

README

README.md

HexPad

This is a macropad with 6 keys, a rotary encoder, and an oled display. Almost everything in the cad file for this project is customizable. You can add as many keys as you want, change the dimensions of the usb c port, the inside dimensions, the wall dimensions, and basically everything else.

You would use my project by pressing the keys to perform specific functions on the computer, like a simple key press like the number 1, or later I might change it to open a site or type a password in. The rotary encoder is to change volume and mute/unmute it. The oled display is to indicate if a button was pressed/changed.

The reason why I made this project is to learn how to build things like this project so in the future I can make other things similar to this.

Features:

  • 3d printed case
  • 6 keys (2 rows of 3)
  • 0.91" OLED display
  • Rotary encoder
  • Almost everything is customizable for the CAD design.

CAD Model:

It is put together with 4 M3 Screws that go directly into the plastic of the case.

It is made of 2 separate 3d printed parts, the top and the bottom.

Here is the share link to the project: https://cad.onshape.com/documents/888c45d35c64a39055184245/w/6328c76e156d93114c845f2d/e/f25f9ae1fe243c3fda6125d5?renderMode=0&uiState=69c88a6d89ef4c064d381a0c

CAD Model: Screenshot from 2026-04-12 15-23-01

Made in Onshape.

PCB:

This PCB was made in KiCad.

Schematic: Screenshot from 2026-04-07 09-58-41

PCB: Screenshot from 2026-04-11 17-42-04

In hindsight, I maybe should have used a matrix to wire the switches, but it was simpler not to.

Firmware:

This project uses C++ as firmware because I was unable to get the QMK firmware to work and I already had experience writing code in C++ (I did have to look up how to do some of the arduino stuff though).

The 6 keys act as a partial number pad for now. The oled is to display the last action, and the rotary encoder is to change volume and mute/unmute it.

BOM:

This should be everything needed for my hackpad:

  • Seeed Studio XIAO RP2040 (1x)
  • Cherry MX Keycap - R2 (Opaque Black) (6x)
  • Cherry MX Brown 55g Tactile Switch (6x)
  • 0.91" OLED Display (1x)
  • Rotary Encoder (1x)
  • Rotary Encoder Knob (1x)
  • M3 x 8mm Socket Button Head Screws (4x)
  • USB-C to USB-A Cable (3ft) (1x)
  • Custom PCB
  • 3d Printed Case

Build Guide

  1. Order the components
  2. Order the PCB
  3. Solder the components onto the board
  4. Move the firmware to the board using Arduino IDE
  5. Put the pcb with everything attached in the case
  6. Screw on the lid to the case

Parts

9
QtyValueFootprintReferences
6SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6
1Conn_01x04_SocketConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ1
1MOUDLE-SEEEDUINO-XIAOSeeeduino XIAO:XIAO-Generic-Hybrid-14P-2.54-21X17.8MMU1
1RotaryEncoder_Switch_MPRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW8

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the HexPad PCB?

It measures 62.6 × 63.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HexPad use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HexPad KiCad files?

From the araschke001-commits/HexPad repository on GitHub, at the commit this page was made from: the board is PCB/HexPad.kicad_pcb and its schematic PCB/HexPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HexPad design in my own project?

Its repository states no licence, so its author keeps all rights: ask araschke001-commits before reusing the design.