Skip to the content
2 layersSpeed sensor, the printed circuit board in 3D

Speed sensor

araobp/pic-mcu2

Application components for Microchip PIC 8bit MCUs

Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
15
Pads
29
Tracks, vias
34, 4
Routed
Yes
KiCad
KiCad 4
Created
21 Jul 2018
Updated
4 Sep 2020

Overview

Speed sensor is an open-source printed circuit board by araobp, from the araobp/pic-mcu repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 7 parts on 15 nets, routed with 34 tracks and 4 vias.

It is built around the PIC16F18326-E/P. Its parts include 2 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the sensors and measurement boards and the PIC boards of this library.

Main components

1

README

README.md

Application components for Microchip PIC MCUs

Background and motivation

In the past years, I have used a lot of the following MCUs in my successful IoT projects at work:

  • PIC1825
  • PIC1829
  • PIC18326
  • PIC18F25K22

Application components

Human motion recognition by IMU and Android (PIC16F1825 with MPU9250 and Android)

=> Project page

Wireless network of infrared array sensors with TWELITE (PIC16F18326)

=> Project page

GPS tracker (PIC18F25K22 with GPS module and Android)

=> Project page

Motion logger for sensing human body movement (PIC16F18326)

=> Project page

Door controller (PIC16F1825)

=> Project page

Tips

Microchip XC8 C compiler

C standard "C99" does not allow some of MCC-generated code. Change the setting to "C90".

Atmel EEPROM

Data addresses for page write must be 64^n.

Parts

7
QtyValueFootprintReferences
151kpic16f1:RegisterR1
1C_Smallpic16f1:Capacitor0.1uF1
1Conn_01x03_Malepic16f1:Pin_Header_3PJ2
1Conn_01x04_Malepic16f1:Pin Header 4PJ1
1LEDpic16f1:LEDD1
1Rpic16f1:Register1k1
1pic16f18326pic16f1:ic-pinsocket-14pinsU2

More from araobp/pic-mcu

4
  • 2 layersMotion sensor, the printed circuit board in 3D

    Motion sensor

    araobp/pic-mcu

    Application components for Microchip PIC 8bit MCUs

    19 parts2GPL-3.0
  • 2 layersI2c adaptor, the printed circuit board in 3D

    I2c adaptor

    araobp/pic-mcu

    Application components for Microchip PIC 8bit MCUs

    16 parts2GPL-3.0
  • 2 layersGnss logger, the printed circuit board in 3D

    Gnss logger

    araobp/pic-mcu

    Application components for Microchip PIC 8bit MCUs

    15 parts2GPL-3.0
  • 2 layersI2c lib eval, the printed circuit board in 3D

    I2c lib eval

    araobp/pic-mcu

    Application components for Microchip PIC 8bit MCUs

    8 parts2GPL-3.0

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

What parts does the Speed sensor use?

7 parts, built around the PIC16F18326-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Speed sensor KiCad files?

From the araobp/pic-mcu repository on GitHub, at the commit this page was made from: the board is kicad/speed_sensor/speed_sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Speed sensor design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).