

Pedal jack footswitch board
- Size
- 54.8 × 37.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 15
- Pads
- 35
- Tracks, vias
- 88, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 Jun 2024
- Updated
- 21 Jun 2024
Overview
Pedal jack footswitch board is an open-source printed circuit board by aragig, from the aragig/pedal_jack_footswitch_board repository on GitHub. It is a 2-layer board of 54.8 × 37.2 mm with 13 parts on 15 nets, routed with 88 tracks and 0 vias.
Its parts include 8 connectors, 1 capacitor, 1 resistor, 1 diode and 1 switch. It belongs with the audio and music boards of this library.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100u | My_Parts:CP_5mm | C1 |
| 1 | 33k | My_Parts:R_Normal | R1 |
| 1 | Battery Minus | My_Parts:Header_Pin_1p_Large_GND | J2 |
| 1 | Battery Plus | My_Parts:Header_Pin_1p_Large_9V | J3 |
| 1 | E9V | My_Parts:Header_Pin_1p_Large_9V | J6 |
| 1 | EGND | My_Parts:Header_Pin_1p_Large_GND | J7 |
| 1 | EIN | My_Parts:Header_Pin_1p_Large_IN | J5 |
| 1 | EOUT | My_Parts:Header_Pin_1p_Large_OUT | J4 |
| 1 | IN | My_Parts:Jack_6.35mm_Akizuki_6P | J1 |
| 1 | JP | My_Parts:JumperWire | JP1 |
| 1 | LED | My_Parts:LED | D1 |
| 1 | OUT | My_Parts:Jack_6.35mm_Akizuki_6P | J8 |
| 1 | SWITCH-3PDT | My_Parts:STOMP-SWITCH-3PDT | S1 |
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Pedal jack footswitch board PCB?
It measures 54.8 × 37.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pedal jack footswitch board use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pedal jack footswitch board KiCad files?
From the aragig/pedal_jack_footswitch_board repository on GitHub, at the commit this page was made from: the board is pedal_jack_footswitch_board.kicad_pcb and its schematic pedal_jack_footswitch_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pedal jack footswitch board design in my own project?
Its repository states no licence, so its author keeps all rights: ask aragig before reusing the design.