Skip to the content
2 layers103 × 41 mmMiniclock, the printed circuit board in 3D

A small DIY Alarm Clock

Size
103 × 41 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
38
Pads
106
Tracks, vias
201, 37
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
23 Feb 2015
Updated
1 Feb 2016

Overview

Miniclock is an open-source printed circuit board by apparentlymart, from the apparentlymart/miniclock repository on GitHub. It is a 2-layer board of 103 × 41 mm with 27 parts on 38 nets, routed with 201 tracks and 37 vias.

It is built around the DS3231MZ+ and LD1117. Its parts include 9 resistors, 6 switches, 4 capacitors, 3 connectors and 2 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

2

Parts

27
QtyValueFootprintReferences
9RResistors_SMD:R_0805_HandSolderingR1, R2, R3, R4, R5, R6, R7, R8, R9
6SW_PUSHminiclock:PUSHSWITCHSW1, SW2, SW3, SW4, SW5, SW6
3CCapacitors_SMD:C_0805_HandSolderingC1, C2, C4
2CONN_01X08Pin_Headers:Pin_Header_Straight_1x08P2, P3
1CONN_01X06Pin_Headers:Pin_Header_Straight_1x06P1
1CPminiclock:CPOL_SMD_6.3mmC3
1DS3231MHousings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU2
1LD1117miniclock:SOT223VR1
1LPC812Housings_SOIC:SOIC-20_7.5x12.8mm_Pitch1.27mmU1

The 25 most common of 27 parts.

More from apparentlymart/miniclock

1
  • 4 layers103 × 41 mmDisplayboard, the printed circuit board in 3D

    Displayboard

    apparentlymart/miniclock

    A small DIY Alarm Clock

    29 parts

Similar boards

  • 2 layers68.6 × 53.3 mmTheeDuinovUnrouted, the printed circuit board in 3D

    TheeDuinovUnrouted

    theevanich/TheeDuino

    My own Arduino board with a RTC!

    39 parts
  • 2 layers156.8 × 67.3 mmYM2151 STM32 VGM, the printed circuit board in 3D

    YM2151 STM32 VGM

    AidanHockey5/YM2151_VGM_STM32

    A hardware arcade video game music player based on the STM32 platform driving a YM2151

    52 parts81AGPL-3.0
  • 2 layers42 × 24 mmTeco, the printed circuit board in 3D

    Teco

    Kreyl/TecoStLink

    ST-Link V2.1 clone

    56 parts5
  • 4 layers40 × 47 mmMaster, the printed circuit board in 3D

    Master

    Tinkerforge/master-brick

    Basis to build stacks and has 4 Bricklet ports

    149 parts5
  • 4 layers40 × 40 mmImu, the printed circuit board in 3D

    Imu

    Tinkerforge/imu-v2-brick

    Full fledged AHRS with 9 degrees of freedom

    108 parts4
  • 2 layers80 × 49 mmObd2, the printed circuit board in 3D

    Obd2

    kevinkrieger/CAN

    CAN repository containing my CAN project, kicad files, firmware, datasheets, references, etc.

    64 parts3
  • 2 layers60 × 50 mmTheia, the printed circuit board in 3D

    Theia

    loldavid6/Theia

    An easy, cheap and open source way to add IoT to a light switch.

    34 parts2CC-BY-SA-4.0
  • 2 layers49.5 × 56.4 mmToadstool Mega328, the printed circuit board in 3D

    Toadstool Mega328

    CrashBangProto/Toadstool-Mega328

    The Toadstool family is made up of breadboard-friendly prototyping boards that house a microcontroller, and modules called Caps that connect using a standard header.

    28 parts1GPL-3.0

Questions

How big is the Miniclock PCB?

It measures 103 × 41 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Miniclock use?

27 parts, built around the DS3231MZ+ and LD1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Miniclock KiCad files?

From the apparentlymart/miniclock repository on GitHub, at the commit this page was made from: the board is mainboard/mainboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Miniclock design in my own project?

Its repository states no licence, so its author keeps all rights: ask apparentlymart before reusing the design.