4 layers35.1 × 77 mm
2 layers
PCB temp
ApolLO-CanSat/PCB-tempRepo for temporary PCB
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 56
- Pads
- 169
- Tracks, vias
- 185, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 Jan 2026
- Updated
- 28 Jan 2026
Overview
PCB temp is an open-source printed circuit board by ApolLO-CanSat, from the ApolLO-CanSat/PCB-temp repository on GitHub. It is a 2-layer board with 15 parts on 56 nets, routed with 185 tracks and 0 vias.
It is built around the RFM98W-433S2. Its parts include 4 connectors, 3 capacitors, 2 resistors and 1 diode. It belongs with the RP2040 boards of this library.
Main components
1Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C3 |
| 2 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3 |
| 1 | 100n | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C4 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | BMP280_Module | Charleslabs_Parts:BMP280_Module | A2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | Conn_01x06_Socket | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J3 |
| 1 | Conn_Coaxial_Small | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J5 |
| 1 | LED | LED_THT:LED_D4.0mm | D1 |
| 1 | RFM98W-433S2 | RFM98W-433S2:XCVR_RFM98W-433S2 | MOD1 |
| 1 | RaspberryPi_Pico | Module_RaspberryPi_Pico:RaspberryPi_Pico_Original_SMD_HandSolder | A1 |
| 1 | ~ | Sensor_Motion:MPU6050 | MPU1 |
Questions
What parts does the PCB temp use?
15 parts, built around the RFM98W-433S2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB temp KiCad files?
From the ApolLO-CanSat/PCB-temp repository on GitHub, at the commit this page was made from: the board is pcb-temp.kicad_pcb and its schematic pcb-temp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB temp design in my own project?
Its repository states no licence, so its author keeps all rights: ask ApolLO-CanSat before reusing the design.
Similar boards
- 4 layers94.5 × 98.5 mm
Kraky
thesh4dows/Kraky
its a diy project of a device that emulates the flipper zero but using well available and cheap parts
42 parts1GPL-3.0 - 2 layers69 × 34.5 mm
Lora ch1
0x000f1/lora-ch1
This project is based on the ESP32 microcontroller that behaves like a bridge between mobile devices and the modules.
37 parts - 2 layers55.6 × 55.5 mm
- 2 layers116.3 × 114.5 mm
- 2 layers46 × 76 mm
- 2 layers33 × 27.9 mm
Rfm69 breakout
jd-boyd/bts_ref_dev_adapter
Example/test circuit of ams1117 chip meant to plug into space of 7505.
5 parts - 4 layers65 × 30 mm
