
Dut artix7-a12t
GMUCERG/fobos
Flexible Open-source workBench fOr Side-channel analysis (FOBOS)

This repository will hold the hardware for the tractor GPS connection board, leveraging an ESP32 microcontroller
Default esp32 board is an open-source printed circuit board by apmm-25, from the apmm-25/trator_gps_hardware repository on GitHub. It is a 2-layer board of 68 × 82 mm with 60 parts on 49 nets, routed with 222 tracks and 578 vias.
It is built around the 0.1UF 50V 5*11, 5VT 1 and ERB-RG2R00V, with the P6KE30A and SB340 among its other parts. Its parts include 16 capacitors, 14 resistors, 8 connectors, 3 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
board/ (has the ibom.html with the positions and instructions for soldering)docs/ (has the pdf datasheets of electronics components that were utilized)default_esp32_board/ (Kicad project with component zips, step model of the board, libraries and manufacture files )| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 22uF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8, C14, C15 |
| 4 | 0.1uF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C11, C12 |
| 4 | 10uF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C9, C10 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 3 | DNP | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C13, C16 |
| 2 | 10.0k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R12 |
| 2 | 174k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R13 |
| 2 | 30.0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R8 |
| 2 | 36.5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R14 |
| 2 | 49.9R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R10 |
| 2 | 5V_T1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J10 |
| 2 | Conn_01x15_Socket | footprints:M20-7821546 | J4, J6 |
| 2 | DNP | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R9 |
| 2 | SOT95P280X110-6N | footprints:TPS56339DDCR | IC1, IC2 |
| 2 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP1, JP2 |
| 1 | 3.3V | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP8 |
| 1 | 31.6k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 3V3_T1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | 3V3_T2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | 4.7uH | footprints:VLS6045 | L2 |
| 1 | 5.6uH | footprints:PA4340562NLT | L1 |
| 1 | 52.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 5V | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP3 |
| 1 | EN_3.3V | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP7 |
| 1 | EN_5V | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP5 |
| 1 | ERB-RG2R00V | footprints:ERBRG4R00V | F1 |
| 1 | GND | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP1 |
| 1 | LOOP_3V3 | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP6 |
| 1 | LOOP_5V | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP4 |
| 1 | P6KE30A | Diode_THT:D_DO-15_P5.08mm_Vertical_KathodeUp | D1 |
| 1 | Pwr | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | SB340 | footprints:SB340 | D2 |
| 1 | Vin | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP2 |
| 1 | ZED_F9P_MOD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | ~ | footprints:ESP32_30pin | U1 |

GMUCERG/fobos
Flexible Open-source workBench fOr Side-channel analysis (FOBOS)



DanielMTorres7/scaranode
Nó de motor Klipper para braço SCARA: RP2040-Zero + TMC2209/DM556, face única fresada

e1ectr0cut1e/pwm_repeater
KiCad Project of a simple 12-24V PWM repeater mainly for LED Strips

emrah1982/KuluckaMakinesi
ESP32 tabanlı, 11 hayvan profili destekleyen çok evreli kuluçka kontrol sistemi. 3.2" TFT dokunmatik ekran, web arayüzü ve OTA güncelleme içerir.

jsteiner4000/Kabelsuchger-t
Ein Gerät mit dem Kabel bzw einzelne Adern ausfindig machen kann.

It measures 68 × 82 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the 0.1UF 50V 5*11, 5VT 1, ERB-RG2R00V and P6KE30A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the apmm-25/trator_gps_hardware repository on GitHub, at the commit this page was made from: the board is default_esp32_board/default_esp32_board.kicad_pcb and its schematic default_esp32_board/default_esp32_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask apmm-25 before reusing the design.