2 layers
2 layers18.2 × 40.9 mm
Arduino Nano rev1 - Prototype
Aplyard/Oled-Clicker117Clicker Counter for Arduino Nano
- Size
- 18.2 × 40.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 7
- Pads
- 40
- Tracks, vias
- 15, 0
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20200829)
- Created
- 24 Sep 2020
- Updated
- 6 Dec 2020
Overview
Arduino Nano rev1 - Prototype is an open-source printed circuit board by Aplyard, from the Aplyard/Oled-Clicker repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 18.2 × 40.9 mm with 4 parts on 7 nets, routed with 15 tracks and 0 vias.
It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
Arduino Nano rev1 - Prototype /PCB/tp4056-master/README.mdtp4056
TP4056 charger kicad schematics
Kicad version with tp4056 footprint and schematics
TP4056 Lithium Cell Charger Module with Battery Protection without usb connector
Charging current set to 130ma (R=10kOm)
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10k | Diode_THT:D_A-405_P10.16mm_Horizontal | R |
| 1 | Arduino_Nano | Module:Arduino_Nano_WithMountingHoles | A1 |
| 1 | OLED | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | OLED |
| 1 | SW_PUSH | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical_SMD_Pin1Right | SW |
More from Aplyard/Oled-Clicker
3- 2 layers18.1 × 38.5 mm
- 2 layers25 × 40.5 mm
Similar boards
- 2 layers18.5 × 26 mm
24g2usb rp2350zero
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
4 parts1.7kApache-2.0 - 2 layers116 × 33 mm
- 2 layers19 × 18 mm
Daughter board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
4 parts915 - 2 layers24.8 × 24.8 mm
Nrf24 breakout
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
4 parts803MIT - 2 layers26 × 20 mm
Cap chain
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
4 parts744MIT - 2 layers34.7 × 20 mm
XG Station Power MSI
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
4 parts712CC-BY-4.0 - 2 layers20.3 × 24.5 mm
Jack power input
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
4 parts546MIT - 2 layers35.1 × 92.1 mm
SDEX2M2 MicroSD Express to M.2 NVMe Adapter for Switch 2 WIP
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
4 parts542GPL-3.0
Questions
How big is the Arduino Nano rev1 - Prototype PCB?
It measures 18.2 × 40.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arduino Nano rev1 - Prototype use?
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino Nano rev1 - Prototype KiCad files?
From the Aplyard/Oled-Clicker repository on GitHub, at the commit this page was made from: the board is Arduino Nano rev1 - Prototype /PCB/Pcb.kicad_pcb and its schematic Arduino Nano rev1.2/PCB/Arduino Nano rev 1.2/Arduino Nano rev 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino Nano rev1 - Prototype design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).