

Dis board
Welcome to this project that demonstrates a data-driven pressure controller for Festo’s VEAE piezoelectric valves.
- Size
- 34 × 13 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 15
- Pads
- 37
- Tracks, vias
- 40, 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Aug 2025
- Updated
- 28 Nov 2025
Overview
Dis board is an open-source printed circuit board by apaws-collab, from the apaws-collab/piezo_valve_unit repository on GitHub. It is a 2-layer board of 34 × 13 mm with 3 parts on 15 nets, routed with 40 tracks and 4 vias.
README
README.mdpiezo_valve_unit
Data-driven pressure control based on Gaussian processes
Welcome to this project that demonstrates a data-driven pressure controller for Festo’s VEAE piezoelectric valves.
Disclaimer: This code is not plug-and-play due to variability in hardware and control system setups. However, it serves as a comprehensive guideline for building a high-accuracy pressure controller, following the outlined implementation steps.
CAD
The block and the cap are created in FreeCAD V1.0 work in progress:
- Valve block (main part), SLA printed
- Cap, FDM printed
- Assembly and parts list
- Construction details
Electric circuit
The distributor board is created in KiCAD V8.0 work in progress:
- Overview
- Layout
- Circuit, KiCad 9.0
- BOM
m-code
This MATLAB code provides a reference implementation of a pressure control framework for soft pneumatic actuators (SPAs), using Festo's VEAE piezo valves. Two valves are assembled in an SLA-printed housing to form a compact 3/3 valve unit. Due to its small size, the valve unit is designed to be mounted directly on or near the actuator. This proximity, combined with volume-adaptive control, enables high-precision pressure regulation.
The code was developed and tested on a MATLAB real-time target machine but is structured to be easily ported to microcontrollers, as it relies on LUT (lookup table) based implementations of the Gaussian processes.
The only external dependency is Peter Corke’s Robotics Toolbox for MATLAB, which is used for motion generation (see https://petercorke.com/toolboxes/robotics-toolbox/).
Procedure:
Start with the pressure_control script. It will guide you through the complete implementation process.
License
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Würth 687312124422 | Altium_WR-FPC (rev22c):687312124422 | J2, J3 |
| 1 | Molex 505578-0371 | Molex_own:505578-0371 | J1 |
Similar boards
- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm

- 2 layers

Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm

- 2 layers124.5 × 33.7 mm

- 2 layers10.5 × 83 mm

- 2 layers21.2 × 51.3 mm

Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Dis board PCB?
It measures 34 × 13 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dis board use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dis board KiCad files?
From the apaws-collab/piezo_valve_unit repository on GitHub, at the commit this page was made from: the board is electronics/distributor_board/dis_board/dis_board.kicad_pcb and its schematic electronics/distributor_board/dis_board/dis_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dis board design in my own project?
Its repository states no licence, so its author keeps all rights: ask apaws-collab before reusing the design.