Skip to the content
2 layers34 × 13 mmDis board, the printed circuit board in 3D

Welcome to this project that demonstrates a data-driven pressure controller for Festo’s VEAE piezoelectric valves.

Size
34 × 13 mm
Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
15
Pads
37
Tracks, vias
40, 4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Aug 2025
Updated
28 Nov 2025

Overview

Dis board is an open-source printed circuit board by apaws-collab, from the apaws-collab/piezo_valve_unit repository on GitHub. It is a 2-layer board of 34 × 13 mm with 3 parts on 15 nets, routed with 40 tracks and 4 vias.

README

README.md

piezo_valve_unit

Data-driven pressure control based on Gaussian processes

Welcome to this project that demonstrates a data-driven pressure controller for Festo’s VEAE piezoelectric valves.

Disclaimer: This code is not plug-and-play due to variability in hardware and control system setups. However, it serves as a comprehensive guideline for building a high-accuracy pressure controller, following the outlined implementation steps.


CAD

The block and the cap are created in FreeCAD V1.0 work in progress:

  • Valve block (main part), SLA printed
  • Cap, FDM printed
  • Assembly and parts list
  • Construction details

Electric circuit

The distributor board is created in KiCAD V8.0 work in progress:

  • Overview
  • Layout
  • Circuit, KiCad 9.0
  • BOM

m-code

This MATLAB code provides a reference implementation of a pressure control framework for soft pneumatic actuators (SPAs), using Festo's VEAE piezo valves. Two valves are assembled in an SLA-printed housing to form a compact 3/3 valve unit. Due to its small size, the valve unit is designed to be mounted directly on or near the actuator. This proximity, combined with volume-adaptive control, enables high-precision pressure regulation.

The code was developed and tested on a MATLAB real-time target machine but is structured to be easily ported to microcontrollers, as it relies on LUT (lookup table) based implementations of the Gaussian processes.

The only external dependency is Peter Corke’s Robotics Toolbox for MATLAB, which is used for motion generation (see https://petercorke.com/toolboxes/robotics-toolbox/).

Procedure:
Start with the pressure_control script. It will guide you through the complete implementation process.


License

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/

Parts

3
QtyValueFootprintReferences
2Würth 687312124422Altium_WR-FPC (rev22c):687312124422J2, J3
1Molex 505578-0371Molex_own:505578-0371J1

Similar boards

  • 2 layers40 × 30 mmBlinky, the printed circuit board in 3D

    Blinky

    earthtojake/text-to-cad

    Design physical products with AI

    3 parts26kMIT
  • 2 layers51.9 × 16 mmPassive2-rpi non standard adapter, the printed circuit board in 3D

    Passive2-rpi non standard adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    3 parts4.4kGPL-2.0
  • 2 layers16.3 × 16.3 mmSensor, the printed circuit board in 3D

    Sensor

    scottbez1/splitflap

    DIY split-flap display

    3 parts4.2k
  • 2 layersSub, the printed circuit board in 3D

    Sub

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    3 parts4kMIT
  • 2 layers85 × 30 mmDual stomp, the printed circuit board in 3D

    Dual stomp

    torvalds/GuitarPedal

    Linus learns analog circuits

    3 parts2.5kGPL-2.0
  • 2 layers124.5 × 33.7 mm172319-1 connector, the printed circuit board in 3D

    172319-1 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    3 parts1.2k
  • 2 layers10.5 × 83 mmProgrammingAdapter, the printed circuit board in 3D

    ProgrammingAdapter

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    3 parts1.1k
  • 2 layers21.2 × 51.3 mmPico reset, the printed circuit board in 3D

    Pico reset

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    3 parts1.1kMIT

Questions

How big is the Dis board PCB?

It measures 34 × 13 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dis board use?

3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dis board KiCad files?

From the apaws-collab/piezo_valve_unit repository on GitHub, at the commit this page was made from: the board is electronics/distributor_board/dis_board/dis_board.kicad_pcb and its schematic electronics/distributor_board/dis_board/dis_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dis board design in my own project?

Its repository states no licence, so its author keeps all rights: ask apaws-collab before reusing the design.