

Tinkercode Extension Generator
- Size
- 104.1 × 168.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 55
- Pads
- 185
- Tracks, vias
- 780, 28
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Feb 2024
- Updated
- 24 Mar 2024
Overview
Lekirbot is an open-source printed circuit board by apauaie, from the apauaie/tinkercode_extension_generator repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 104.1 × 168.4 mm with 57 parts on 55 nets, routed with 780 tracks and 28 vias.
It is built around the TB6612FNG(O,C,8,EL and EG1213. Its parts include 17 resistors, 7 ICs, 6 diodes, 5 capacitors and 3 connectors. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdUse these files at your own risk.

These files are generator files to create extension zip file for use with Tinkercode apps. It will generate a standard extension with same pin connection as Lekirbot. Please refer to the Lekirbot PCB. Content of this github is divided into two:
- PCB Design with KICAD for LekirBot. It is a simple line following robot with 5 QRE1113 sensors, 2 servo connections, 1 ultrasonic connection, built in TB6612FNG Motor Driver
- TinkerCode Block Extension Generator to be use with Tinkercode apps from tinkercode.my.
Instruction to use PCB Files PCB files is for KICAD. Free to modify (Open Source) Download KICAD to modify these files. https://www.kicad.org/download/
)
)
)
Instruction to use Extension Generator Files Download the files from Github Place GeneratorBot.exe and lekirbot folder in the same folder.

Run GeneratorBot.exe to generate extension zip file. Insert your Robot name and Robot Image.

In Tinkercode Apps, press the Extension (Spanar Icon) button to upload the zip files.
)
)
Check if your upload is successful by going to the extension menu
)
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10 |
| 6 | 100OHM-0603-1/10W-1% | lekirbot:0603 | R1, R2, R3, R4, R5, R16 |
| 5 | 100 | lekirbot:0603-RES | R7, R9, R11, R13, R15 |
| 5 | 10K | lekirbot:0603-RES | R6, R8, R10, R12, R14 |
| 5 | LED-FKIT-1206 | lekirbot:FKIT-LED-1206 | D1, D2, D3, D4, D5 |
| 5 | QRE11131:1 | lekirbot:QRE1113-1_1 | U2, U5, U6, U7, U8 |
| 4 | 100n | lekirbot:C0603-ROUND | C1, C3, C6, C7 |
| 4 | CONN_01 | lekirbot:1X01 | M1A0, M1B0, M2A0, M2B0 |
| 2 | 455-1750-1-ND | lekirbot:1X03 | J1, J2 |
| 2 | CONN_02 | lekirbot:1X02 | BATT0, LDR0 |
| 1 | 1kOHM-0603-1/10W-1% | lekirbot:0603 | R17 |
| 1 | 22UF-0805-6.3V-20% | lekirbot:0805 | C2 |
| 1 | 7404D | lekirbot:SO14 | IC3 |
| 1 | ARDUINO_NANO | lekirbot:ARDUINO_NANO | ARDUINO_NANO1 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | DIODE-SCHOTTKY-SS14 | lekirbot:SMA-DIODE | D7 |
| 1 | EG1213 | lekirbot:EG1213 | S2X0 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TB6612FNG(O,C,8,EL | lekirbot:SOP65P760X160-24N | U3 |
Similar boards
- 2 layers68.8 × 53.3 mm

- 2 layers55 × 100 mm

- 2 layers99.9 × 43.2 mm

- 2 layers54.8 × 54.7 mm

- 2 layers100 × 70.9 mm

- 2 layers104.1 × 67.1 mm

BarometricPressureSensor
cdennis3223/BarometerArray
Capstone Project in collaboration with Sam Bower, Utilizing ESP32 controlled devices to measure fast changing barometric pressure in an arrayed pattern with time correlated data.
44 parts1 - 2 layers63.5 × 22.9 mm

9v battery to usb
lalmiAhmed/9v_battery_to_usb
pcb design fork for the cold power usb charger
12 parts1 - 2 layers140 × 64.8 mm

Console hardware
ECE411-Practicum-Group11/ECE411-PracticumProject-G11
Fall 2022 ECE 411 Practicum Project for Group 11
68 partsCC0-1.0
Questions
How big is the Lekirbot PCB?
It measures 104.1 × 168.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lekirbot use?
57 parts, built around the TB6612FNG(O,C,8,EL and EG1213. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lekirbot KiCad files?
From the apauaie/tinkercode_extension_generator repository on GitHub, at the commit this page was made from: the board is lekirbot PCB/lekirbotv1/lekirbot.kicad_pcb and its schematic lekirbot PCB/lekirbotv1/lekirbot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lekirbot design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).