Skip to the content
2 layers76.2 × 31 mmFDAdapter, the printed circuit board in 3D

Sharp X68000 Floppy disk adapter based on Raspberry Pico(C)

Size
76.2 × 31 mm
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
33
Pads
73
Tracks, vias
84, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
21 Jun 2023
Updated
17 Oct 2026

Overview

FDAdapter is an open-source printed circuit board by aotta, from the aotta/X68KFDPi repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 76.2 × 31 mm with 2 parts on 33 nets, routed with 84 tracks and 0 vias.

README

README.md

X68KFDPi

Sharp X68000 Floppy disk adapter based on Raspberry Pico(C)

addedd v.1.1: (last night build) - it should improve reading signals and avoid pressing button when floppy inserted (work in progress, for testing purpouse only!)

Use 2 buttons to give X68k the insert/eject signals: you have to eject the virtual floppy (turn off green led) when led flashes, select the image on HxC/Gotek, then re-insert the virtual floppy (Green led re-turned on). This for disk 1 or 2, as needed. Now it works for all games i tested so far, but led blinking is not fully supported

Note: use only 74LVC245 IC on your adapter, other type of 74XX245 logic IC may damage your Raspberry!

More info on nfg.forums : X68KFDUINO - new adapter for external Floppy Drive for HxC & Gotek

ScreenShot ScreenShot ScreenShot ScreenShot ScreenShot

Parts

2
QtyValueFootprintReferences
1DB37_MaleConnector_Dsub:DSUB-37_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mmJ1
1FD Ext ConnectorConnector_IDC:IDC-Header_2x17_P2.54mm_HorizontalJ2

More from aotta/X68KFDPi

1
  • 2 layers91.6 × 79.3 mmX68KFDPI, the printed circuit board in 3D

    X68KFDPI

    aotta/X68KFDPi

    Sharp X68000 Floppy disk adapter based on Raspberry Pico(C)

    22 parts9GPL-3.0

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the FDAdapter PCB?

It measures 76.2 × 31 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FDAdapter use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FDAdapter KiCad files?

From the aotta/X68KFDPi repository on GitHub, at the commit this page was made from: the board is FDAdapter/FDAdapter.kicad_pcb and its schematic FDAdapter/FDAdapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FDAdapter design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).