

Rgb led cube
- Size
- 250 × 250 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 98
- Nets
- 308
- Pads
- 1,120
- Tracks, vias
- 1,285, 61
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Apr 2020
- Updated
- 18 Jan 2021
Overview
Rgb led cube is an open-source printed circuit board by antonu17, from the antonu17/rgb_led_cube repository on GitHub. It is a 2-layer board of 250 × 250 mm with 98 parts on 308 nets, routed with 1,285 tracks and 61 vias.
It is built around the IRLML6401TRPBF, MMBT2222A-TP and ICS-43434, with the OSTTC022162 among its other parts. Its parts include 41 resistors, 17 capacitors, 16 ICs, 16 transistors and 1 connector. It belongs with the lEDs and displays boards of this library.
Main components
4IRLML6401TRPBF
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 125pF 12V 15nC@5V 180pF 4.3A 50mΩ@4.5V 830pF 950mV SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsMMBT2222A-TP
SOT-23-55℃~+150℃ 1 NPN 100 10nA 1V 300MHz 350mW 40V 600mA 6V NPN SOT-23 Bipolar (BJT) ROHSMicro Commercial ComponentsBipolar (BJT)ICS-43434
LGA-6(3.5x2.7)-26dB -40℃~+85℃ 0.98mm 1.65V~3.63V 2.65mm 3.5mm 550uA 64dB I2S Omnidirectional Omnidirectional pickup LGA-6(3.5x2.7) MEMS Microphones ROHSTDK InvenSenseMEMS MicrophonesOSTTC022162
--40℃~+115℃ 1 10mm 14~20 15A 1x2P 2 2P 300V 5.08mm Blue M2.6 Through Hole Plugin,P=5.08mm Screw Terminal Blocks ROHSOn-Shore TechScrew Terminal Blocks
README
README.mdrgb_led_cube
Parts
98| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R20, R21, R23, R24, R26 +16 |
| 17 | 0.1µF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C10, C11, C12, C13, C14, C15, C16, C17 +1 |
| 16 | TLC59711PWPR | Package_SO:HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.75x3.43mm_ThermalVias | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16 |
| 8 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R19, R22, R25, R28, R31, R34, R37, R40 |
| 8 | IRLML6401TRPBF | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q5, Q7, Q9, Q11, Q13, Q15 |
| 8 | MMBT2222A-TP | Package_TO_SOT_SMD:SOT-23 | Q2, Q4, Q6, Q8, Q10, Q12, Q14, Q16 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R41 |
| 1 | CONTROLLER | rgb_led_cube:ESP32_NodeMCU | CNTL1 |
| 1 | CUBE8X8X8 | rgb_led_cube:CUBE8X8X8 | DS1 |
| 1 | ICS-43434 | rgb_led_cube:MIC_ICS-43434 | MK1 |
| 1 | OSTTC022162 | digikey-footprints:Term_Block_1x2_P5.08MM | J1 |
More from antonu17/rgb_led_cube
1- 2 layers250 × 250 mm

Similar boards
- 2 layers101.4 × 58.4 mm

- 4 layers63 × 72.8 mm

Side Project
gmalberico/Vehicle-Forward-Warning-Sensor-Project
A compact vehicle-mounted prototype that uses LiDAR ranging and wireless communication to warn a driver when an object is detected ahead.
38 parts - 2 layers

- 2 layers101.6 × 63.5 mm

Dccpp pcb
trainman419/dccpp_pcb
This is the DCC++ board project. It's a relatively simple printed circuit board which integrates all of the components that are necessary for a DCC++ base station onto a single PCB, with all of the things you need, and…
70 parts - 4 layers121.9 × 44.4 mm

- 2 layers74.8 × 49.8 mm

BMW BT
Christian-Ristevski/E9X-CAN-BT
Using BM83 and MCP2515 to add CAN-bus connected bluetooth audio to BMW E9X series
95 parts3 - 2 layers31.5 × 23.3 mm

- 2 layers31.1 × 57.6 mm

MAhTime
Rohit04121998/mAhTime
This repository includes all the KiCAD based circuit designs and the code for calculating battery life
31 parts1MIT
Questions
How big is the Rgb led cube PCB?
It measures 250 × 250 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rgb led cube use?
98 parts, built around the IRLML6401TRPBF, MMBT2222A-TP, ICS-43434 and OSTTC022162. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rgb led cube KiCad files?
From the antonu17/rgb_led_cube repository on GitHub, at the commit this page was made from: the board is rgb_led_cube.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rgb led cube design in my own project?
Its repository states no licence, so its author keeps all rights: ask antonu17 before reusing the design.