4 layers100 × 100 mm
2 layers55 × 50 mm
Eggtimer
antonstigemyrhill/eggtimereggtimer for pcb design
- Size
- 55 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 55
- Pads
- 180
- Tracks, vias
- 301, 34
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Jun 2026
- Updated
- 18 Jun 2026
Overview
Eggtimer is an open-source printed circuit board by antonstigemyrhill, from the antonstigemyrhill/eggtimer repository on GitHub. It is a 2-layer board of 55 × 50 mm with 54 parts on 55 nets, routed with 301 tracks and 34 vias.
It is built around the USBLC6-2SC6 and 74HC595. Its parts include 18 resistors, 10 capacitors, 10 diodes, 2 ICs and 1 connector. It belongs with the STM32 boards of this library.
Main components
2
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
README
README.mdeggtimer
eggtimer for pcb design
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 680 | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7, R11, R12, R13, R14, R15, R16, R17, R18 |
| 8 | LED yellow | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C5, C8, C9 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C7 |
| 4 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R10 |
| 4 | M_H | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C3, C10 |
| 1 | 74HC595 | custom:74HC595D,118 SOIC-16 Shift Registers | 74HC595 |
| 1 | Battery_Cell | custom:screw_terminal_2 | Battery_Cell1 |
| 1 | Buzzer | custom:HND-2319 Buzzer | Buzzer1 |
| 1 | LED G | LED_SMD:LED_0805_2012Metric | D10 |
| 1 | LED r | LED_SMD:LED_0805_2012Metric | D9 |
| 1 | LOGO | LOGO | egg |
| 1 | MCP73831-2-MC | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm | U2 |
| 1 | Rotary_Encoder | custom:PEC12R-4220F-N0024 encoder | Rotary_Encoder1 |
| 1 | STM32F042F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | STM32F042F6P6 |
| 1 | SW_Push | custom:TK-6580DS-1 push button | Button |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | nrst-swclk-gnd-swdio-3v3 | Connector_Harwin:Harwin_LTek-Male_05_P2.00mm_Vertical | nrst-swclk-gnd-swdio-3v3 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-89-3 | HT7533-1 |
Similar boards
- 4 layers99.5 × 99.5 mm
- 4 layers55 × 55 mm
- 4 layers240 × 70 mm
- 2 layers
Solartron 7075 interface unplaced
cHemingway/llm_circuitgen_tests
Tests of various "circuit as code" tools
94 parts - 2 layers126.9 × 76.2 mm
GolfSpeedSensor
ebur644/GolfSpeedSensorProject
Speed sensor for detecting how fast a golf ball is hit
47 parts - 2 layers90 × 62.1 mm
- 4 layers435 × 150 mm
Clavier
rappepi/ESP32-S3-keyboard
This project is licensed under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). You are free to use, modify, and share the project as long as it is not for commercial use and you give…
588 parts
Questions
How big is the Eggtimer PCB?
It measures 55 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Eggtimer use?
54 parts, built around the USBLC6-2SC6 and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eggtimer KiCad files?
From the antonstigemyrhill/eggtimer repository on GitHub, at the commit this page was made from: the board is KiCAD/eggtimer.kicad_pcb and its schematic KiCAD/eggtimer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eggtimer design in my own project?
Its repository states no licence, so its author keeps all rights: ask antonstigemyrhill before reusing the design.