2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers
Oximeter board
antonloof/oximetera oximeter, used as demo project for ETA-dagen 2021. Actual hw is not in this repo, just test hw
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 7
- Pads
- 17
- Tracks, vias
- 31, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Aug 2021
- Updated
- 25 Aug 2021
Overview
Oximeter board is an open-source printed circuit board by antonloof, from the antonloof/oximeter repository on GitHub. It is a 2-layer board with 7 parts on 7 nets, routed with 31 tracks and 0 vias.
Its parts include 3 resistors, 2 diodes, 1 transistor and 1 connector.
README
README.mdoximeter
a oximeter, used as demo project for ETA-dagen 2021. Actual hw is not in this repo, just test hw
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R_Small | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3 |
| 1 | Conn_01x04 | TerminalBlock:TerminalBlock_Altech_AK300-4_P5.00mm | J1 |
| 1 | D_Photo | good_things:sfh-2440-l | D1 |
| 1 | LED | LED_THT:LED_D5.0mm | D2 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
Questions
What parts does the Oximeter board use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Oximeter board KiCad files?
From the antonloof/oximeter repository on GitHub, at the commit this page was made from: the board is oximeter_board/oximeter_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Oximeter board design in my own project?
Its repository states no licence, so its author keeps all rights: ask antonloof before reusing the design.