
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

This is my personal repository for the gd32f150 microcontroller, with selfmade breakout board and peripheral library with the purpose of learning low level bringup.
Gd32f150 is an open-source printed circuit board by AntonDanneels, from the AntonDanneels/gd32f150 repository on GitHub, published under the MIT licence. It is a 2-layer board of 30.2 × 25 mm with 21 parts on 32 nets, routed with 242 tracks and 25 vias.
It is built around the GD32F150G8U6. Its parts include 6 capacitors, 5 resistors, 4 connectors, 2 ICs and 1 crystal.
This is my personal repository for the gd32f150 microcontroller, with selfmade breakout board and peripheral library with the purpose of learning low level bringup.
The gd32f150 is a small & cheap microcontroller from GigaDevice that has USB device support & all other standard peripherals you would expect from a modern ARM mcu.
A very simple 2-layer PCB is provided in the breakout directory.
Generic code to use the peripherals is located in the lib directory. Current supported features:
| Feature | State |
|---|---|
| SPI | Initial bringup done |
| GPIO | Initial bringup done |
| RCU | Initial bringup done |
| RTC | Initial bringup done |
| PMU | Initial bringup done |
| EXTI | Initial bringup done |
| I2C | WIP |
| ADC | Planned |
| USB | Planned |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | Conn_01x11 | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J3, J4 |
| 2 | USR1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | USR1, USR2 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | BOOT_SEL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | GD32F150G8 | gd32f150:QFN-28_EP_4x4_Pitch0.4mm | U1 |
| 1 | ME6219 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | PWR | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | PWR1 |
| 1 | USB_IN | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 30.2 × 25 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the GD32F150G8U6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AntonDanneels/gd32f150 repository on GitHub, at the commit this page was made from: the board is breakout/gd32f150/gd32f150.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).