

Controller
Mobitec flipdot destination sign project
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 36
- Pads
- 67
- Tracks, vias
- 128, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Apr 2018
- Updated
- 24 Jan 2021
Overview
Controller is an open-source printed circuit board by anton-christensen, from the anton-christensen/flipdot-mobitec repository on GitHub. It is a 2-layer board with 7 parts on 36 nets, routed with 128 tracks and 0 vias.
It is built around the LM1117-5.0. Its parts include 4 connectors, 2 capacitors and 1 IC.
Main components
1Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x15_Female | Pin_Headers:Pin_Header_Straight_1x15_Pitch2.54mm | J3, J4 |
| 1 | 100nF | Capacitors_THT:C_Axial_L12.0mm_D6.5mm_P20.00mm_Horizontal | C1 |
| 1 | 10uF | Capacitors_THT:C_Axial_L12.0mm_D6.5mm_P20.00mm_Horizontal | C2 |
| 1 | Barrel_Jack | Connectors:BARREL_JACK | J1 |
| 1 | Conn_02x13_Odd_Even | Connectors_IDC:IDC-Header_2x13_Pitch2.54mm_Straight | J2 |
| 1 | LM1117-5.0 | TO_SOT_Packages_THT:TO-220-3_Horizontal | U1 |
Similar boards
- 2 layers40 × 108 mm

- 2 layers133 × 98 mm

Precharge
michaelruppe/FSAE
Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)
121 parts59MIT - 2 layers84.3 × 58.4 mm

EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers109.4 × 108.5 mm

- 2 layers240 × 194 mm

Infinitas
freeDSP/freeDSP-INFINITAS
USB Audio Class 2 compliant audio interface with up to 32 input and up to 32 output channels and optional ADAU1452 DSP.
1,020 parts35 - 2 layers100 × 88 mm

- 2 layers38.1 × 101.6 mm

RP2040 Audio
emeb/RP2040_Audio
A Eurorack module for stereo audio effects based on the Raspberry Pi RP2040 MCU
121 parts23MIT - 2 layers97 × 97 mm

QO100 RX
barisdinc/N3B_SDR_Transceiver_HW
V/U/SHF and QO-100 SDR Transceiver Project
167 parts20GPL-3.0
Questions
What parts does the Controller use?
7 parts, built around the LM1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the anton-christensen/flipdot-mobitec repository on GitHub, at the commit this page was made from: the board is controllerDesign/controller/controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask anton-christensen before reusing the design.