6 layers69.3 × 111.8 mm
FMC MIPI v2
VideoGPU/FMC_MIPI
FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface
143 parts22
4 layers236.3 × 191.5 mm
Cyborg65r2 thermo pcb
anthonyjwall/CYBORG2_PCBPCB Design for Cyborg65r2
- Size
- 236.3 × 191.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 165
- Nets
- 165
- Pads
- 757
- Tracks, vias
- 1,067, 283
- Pours
- 159
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Apr 2023
- Updated
- 18 Apr 2023
Overview
Cyborg65r2 thermo pcb is an open-source printed circuit board by anthonyjwall, from the anthonyjwall/CYBORG2_PCB repository on GitHub. It is a 4-layer board of 236.3 × 191.5 mm with 165 parts on 165 nets, routed with 1,067 tracks and 283 vias.
It is built around the SN74AVCH16T245GR, GRM21BZ71E106KE15 and 1N4148WT, with the GRM21BC71H475KE11, GRM188C81C106MA73 and LQW18ANR22G00D among its other parts. Its parts include 61 capacitors, 44 connectors, 18 resistors, 12 ICs and 8 diodes.
Main components
9
SN74AVCH16T245GR
TSSOP-48-6.2mm-40℃~+85℃ 1.2V~3.6V 12mA 12mA 2 2.7ns@3.3V,50pF 25uA 74AVCH 8 Bidirectional Power-off isolation、Output enable、Bus hold、Level shifting Tri-State TSSOP-48-6.2mm Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
GRM21BZ71E106KE15
080510uF 25V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMT
1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching DiodesGRM21BC71H475KE11
08054.7uF 50V X7S ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMT
GRM188C81C106MA73
060310uF 16V X6S ±20% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMT
LQW18ANR22G00D
0603120mA 2.5Ω 220nH Unshielded Inductor ±2% 0603 Power Inductors ROHSMurataPower Inductors
3296W-1-103LF
插件-3P,9.5x4.9mm10kΩ 28 500mW ±10% ±150ppm/℃ Plugin-3P,9.5x4.9mm Potentiometers, Variable Resistors ROHSjieerruiPotentiometers & Variable Resistors
3296W-1-104LF
插件-3P,9.5x4.9mm100kΩ 28 500mW ±10% ±150ppm/℃ Plugin-3P,9.5x4.9mm Potentiometers, Variable Resistors ROHSjieerruiPotentiometers & Variable Resistors
MF-USMF020-2
1210-40℃~+85℃ 2.5mm 200mA 3.2mm 30V 400mA 400mΩ 5Ω 600mW 1210 Resettable Fuses ROHSBournsResettable Fuses
README
README.mdCYBORG2_PCB
PCB Design for Cyborg65r2
Parts
165| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | GRM21BZ71E106KE15 | Capacitor_SMD:C_0805_2012Metric | C10, C12, C13, C14, C16, C17, C18, C20, C21, C22, C24, C25, C26, C28, C29, C30 +32 |
| 18 | 5006 | cyborg65r2_connectors:5006 | J1, J2, J5, J10, J13, J14, J17, J18, J21, J22, J23, J24, J29, J30, J34, J35 +2 |
| 12 | TE 826926-3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J8, J12, J16, J20, J27, J28, J32, J36, J38, J41, J48 |
| 10 | 413990-1 | cyborg65r2_connectors:413990-1 | J3, J7, J11, J15, J19, J25, J26, J31, J33, J37 |
| 8 | 1N4148WT | Diode_SMD:D_SOD-523 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | GRM21BC71H475KE11 | Capacitor_SMD:C_0805_2012Metric | C11, C15, C19, C23, C27, C33, C34, C39 |
| 8 | LT3045xMSE | Package_SO:MSOP-12-1EP_3x4mm_P0.65mm_EP1.65x2.85mm | U2, U3, U4, U5, U6, U7, U8, U9 |
| 6 | ERJ-6ENF6041V | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R12, R17, R18 |
| 5 | ERJ-6ENF3322V | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R5, R7 |
| 5 | GRM188C81C106MA73 | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5 |
| 5 | LQW18ANR22G00D | cyborg65r2_passives:INDC1608X100N | L1, L2, L3, L4, L5 |
| 4 | 3296W-1-103LF | cyborg65r2_passives:3296W-1 | VR1, VR2, VR3, VR4 |
| 4 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2, FID3, FID4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 73251-3140 | cyborg65r2_connectors:732513140 | J39, J40, J47 |
| 3 | R0805_DNP | Resistor_SMD:R_0805_2012Metric | R13, R14, R15 |
| 3 | SN74AVCH16T245GR | cyborg65r2_actives:SOP50P810X120-48N | U10, U11, U12 |
| 2 | 4-1437565-1 | cyborg65r2_passives:FSM-SWITCH | S1, S2 |
| 2 | ERJ-6ENF2492V | Resistor_SMD:R_0805_2012Metric | R4, R8 |
| 1 | 3296W-1-104LF | cyborg65r2_passives:3296W-1 | VR5 |
| 1 | Conn_02x34_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x34_P2.54mm_Vertical | J46 |
| 1 | ERJ-6ENF1212V | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | MF-USMF020-2 | cyborg65r2_passives:FUSC3226X110N | F1 |
| 1 | R0603_DNP | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | cyborg65r2 | cyborg65r2_actives:QFN56 | U1 |
The 164 most common of 165 parts.
Questions
How big is the Cyborg65r2 thermo pcb PCB?
It measures 236.3 × 191.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Cyborg65r2 thermo pcb use?
165 parts, built around the SN74AVCH16T245GR, GRM21BZ71E106KE15, 1N4148WT and GRM21BC71H475KE11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cyborg65r2 thermo pcb KiCad files?
From the anthonyjwall/CYBORG2_PCB repository on GitHub, at the commit this page was made from: the board is cyborg65r2_thermo_pcb/cyborg65r2_thermo_pcb.kicad_pcb and its schematic cyborg65r2_pcb/CLKIN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cyborg65r2 thermo pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask anthonyjwall before reusing the design.
Similar boards
- 4 layers310 × 210 mm
- 2 layers21.7 × 10 mm
Sensor Unit
Dooganar/engg3800-t3-eaar-pcb-design
A repo used to track and collaborate on the pcb design for the University of Queensland "Team Project II" course.
164 parts - 2 layers82.5 × 85.3 mm
- 4 layers140 × 100 mm
Rcm dish controller
jrseti/Dish
Simple controller with toggle switches to move the dish motors
314 partsCC0-1.0 - 4 layers100 × 100 mm
- 2 layers260 × 270 mm
- 4 layers76.5 × 69 mm
Fmc sdram
chipsalliance/rocket-pcb
PCB libraries and templates for rocket-chip based FPGA/ASIC designs
73 parts21Apache-2.0