Skip to the content
2 layers91.9 × 81.1 mmRgb cat, the printed circuit board in 3D

A cat-shaped RGB PCB badge to teach the basics of soldering 😺

Size
91.9 × 81.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
13
Pads
34
Tracks, vias
119, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
8 Apr 2023
Updated
8 Apr 2023

Overview

Rgb cat is an open-source printed circuit board by ANG13T, from the ANG13T/rgb-cat repository on GitHub, published under the MIT licence. It is a 2-layer board of 91.9 × 81.1 mm with 14 parts on 13 nets, routed with 119 tracks and 0 vias.

Its parts include 6 resistors, 2 diodes and 1 switch. It belongs with the lEDs and displays boards of this library.

README

README.md

RGB Cat PCB 😺

A simple cat-shaped PCB badge to teach the basics of soldering. This PCB lets you control the color of two RGB lights using three potentiometers.

Article coming soon!

Front Display

Materials

  • 6x 100ohm Resistors
  • 2x RGB LEDs with Common Cathode (LED_RKGB)
  • 3x Trim Potentiometers
  • 3V Coin Cell Battery
  • 3V 1060 Battery Cell Holder
  • SPDT Slide Switch

Schematic

Schematic

PCB Design

PCB

Preview

Front Display Back Display

Parts

14
QtyValueFootprintReferences
6RResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_HorizontalR1, R2, R3, R4, R5, R6
2LED_RKGBLED_THT:LED_D5.0mm-4_RGB_Wide_PinsD1, D2
1BATBattery:BatteryHolder_Keystone_1060_1x2032BT1
1BLUEPotentiometer_THT:Potentiometer_Bourns_3386P_VerticalRV3
1GREENPotentiometer_THT:Potentiometer_Bourns_3386P_VerticalRV2
1LOGOGraphics:icon4G***
1REDPotentiometer_THT:Potentiometer_Bourns_3386P_VerticalRV1
1SW_SPDTSW SS12D:Schiebeschalter SS-12D00.kicad_modSW1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Rgb cat PCB?

It measures 91.9 × 81.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rgb cat use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rgb cat KiCad files?

From the ANG13T/rgb-cat repository on GitHub, at the commit this page was made from: the board is rgb-cat/RGB_Cat.kicad_pcb and its schematic rgb-cat/RGB_Cat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rgb cat design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).