
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

555 IC Circuit of Airplane PCB with Astable Dual LED Flashing ✈️✨
Plane555 is an open-source printed circuit board by ANG13T, from the ANG13T/555-plane-pcb repository on GitHub. It is a 2-layer board of 115.1 × 97.3 mm with 22 parts on 10 nets, routed with 93 tracks and 2 vias.
Its parts include 3 diodes, 2 resistors, 1 capacitor and 1 switch. It belongs with the lEDs and displays boards of this library.
A simple airplane PCB to teach the principles of the 555 timer IC and astable mode using blinking LEDs.
| Component | Link |
|---|---|
| 1x 3mm Red LED | Amazon Link |
| 1x 3mm Green LED | Amazon Link |
| 1x 3mm White LED | Amazon Link |
| NE555 IC | Amazon Link |
| 10uF - 50V Electrolytic Capacitor | Amazon Link |
| 3V Coin Cell Battery | Amazon Link |
| 3V Coin Cell Battery Holder | Amazon Link |
| 1.2k ohm Axial Resistor | Amazon Link |
| 90 ohm Axial Resistor | Amazon Link |
| SPDT Slide Switch | Amazon Link |
| 100k Potentiometer | Amazon Link |
The duty cycle of a circuit is ratio of the time the signal is active (high) to the total period of the signal. We want the duty cycle of this circuit to be close to 50% in order to get a congruent off/on blinking pattern form the airplane LEDs.
R1:R2 ratio predominately is what sets the duty cycle for the circuit
$$ t_h = ln(2) * (R_1 + R_2) * C $$
$$ t_l = ln(2) * R_2 * C $$
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 2 | LED | LED_THT:LED_D3.0mm | D2, D3 |
| 1 | |||
| 1 | 1.2k ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 90 ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | BATTERY | Battery:BatteryHolder_Keystone_1060_1x2032 | BATTERY |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D1 |
| 1 | LM555xM | Package_DIP:DIP-8_W7.62mm | 555 |
| 1 | POT | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | 100k POT |
| 1 | SW_SPDT | Button_Switch_THT:Schiebeschalter_SS-12D00 | SW1 |

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 115.1 × 97.3 mm and has 2 copper layers, 1.6 mm thick.
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ANG13T/555-plane-pcb repository on GitHub, at the commit this page was made from: the board is Plane555/Plane555.kicad_pcb and its schematic Plane555/Plane555.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ANG13T before reusing the design.