
Nanit
andykarpov/nanit
Alternate PCB for NANIT project https://radiokot.ru/circuit/digital/measure/117/

Alternate PCB for NANIT project https://radiokot.ru/circuit/digital/measure/117/
Nanit is an open-source printed circuit board by andykarpov, from the andykarpov/nanit repository on GitHub. It is a 2-layer board of 31.2 × 53.3 mm with 68 parts on 60 nets, routed with 358 tracks and 98 vias.
It is built around the ATMEGA88PA-AU, LTC4054ES5-4.2#PBF and US1M, with the BC847, BC857 and BZV55C18 among its other parts. Its parts include 22 resistors, 17 capacitors, 7 diodes, 3 ICs and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
The original article: https://radiokot.ru/circuit/digital/measure/117/

| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C4, C5, C6, C7, C8, C17 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R11, R12, R13, R14 |
| 4 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16, R18, R19, R20 |
| 4 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4, R5, R6 |
| 3 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C13, C14, C15 |
| 3 | US1M | Diode_SMD:D_SMA | D5, D6, D7 |
| 2 | 10uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1, L2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C10 |
| 2 | 2M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R21, R22 |
| 1 | 10pF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C9 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C3 |
| 1 | 1N4148 | Diode_SMD:D_MELF | D4 |
| 1 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 20 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R17 |
| 1 | 220pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12 |
| 1 | 22nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C11 |
| 1 | 22uH | Inductor_SMD:L_Bourns-SRN6028 | L3 |
| 1 | 2k* | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 3.7V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | 300 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 32.768 KHz | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y1 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C16 |
| 1 | 6.34 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9 |
| 1 | 750 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R15 |
| 1 | ATmega88PA-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | BC857 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BZV55C18 | Diode_SMD:D_MELF | D8 |
| 1 | Button 1 | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Button 2 | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Buzzer | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BZ1 |
| 1 | CEEH54 | Sensors_Radiation:CEEH54 | TR1 |
| 1 | Charging | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | IRLML6344 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | LT1937 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | LTC4054ES5-4.2 | Package_TO_SOT_SMD:TSOT-23-5 | U1 |
| 1 | Nokia 2660/2760 mini | Sensors_Radiation:LCD2600 | J2 |
| 1 | PROG_MISO | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | PROG_MOSI | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | PROG_SCK | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
| 1 | RST | TestPoint:TestPoint_Pad_1.5x1.5mm | TP4 |
| 1 | SBM-21 (SMB-10) | Sensors_Radiation:SBM-21 | S1 |
| 1 | SS14 | Diode_SMD:D_SMA | D1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J1 |

andykarpov/nanit
Alternate PCB for NANIT project https://radiokot.ru/circuit/digital/measure/117/

andykarpov/nanit
Alternate PCB for NANIT project https://radiokot.ru/circuit/digital/measure/117/

andykarpov/nanit
Alternate PCB for NANIT project https://radiokot.ru/circuit/digital/measure/117/


MadsRudolph/vinyl-adc
Discrete 3rd-order delta-sigma stereo audio ADC, built from op-amps and logic gates: a four-layer Raspberry Pi HAT made by PCBWay, with KiCad files, SPICE simulations and measurements



hacklabkyiv/prismo-reader
RFID readers of Prismo access management system

shm-dmitry/auto_close_window
This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"

leafai-io/leaf-node-v3.x
Modular node for sensor monitoring and device control in grow environments.

sihyun-noh/zephyr_485toSDI12
Zephyr RTOS 기반 Dajilog MCU 장비의 firmware, custom board 정의, 공통 component, KiCad hardware source를 함께 관리하는 repository입니다.
It measures 31.2 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
68 parts, built around the ATMEGA88PA-AU, LTC4054ES5-4.2#PBF, US1M and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the andykarpov/nanit repository on GitHub, at the commit this page was made from: the board is pcb/revA/nanit.kicad_pcb and its schematic pcb/revC/nanit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask andykarpov before reusing the design.