

Signal mover
Rpo for pcb layouts, gerber and gcode files
- Size
- 26.7 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 5
- Pads
- 10
- Tracks, vias
- 9, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Jun 2018
- Updated
- 30 Aug 2022
Overview
Signal mover is an open-source printed circuit board by androiders, from the androiders/pcbs repository on GitHub. It is a 2-layer board of 26.7 × 20.3 mm with 4 parts on 5 nets, routed with 9 tracks and 0 vias.
Its parts include 2 resistors and 1 connector.
README
README.mdView this project on CADLAB.io.
pcbs
Repo for pcb layouts, gerber and gcode files
Ki-Cad
PCB layout:
- Use as wide traces as possible. 1mm preffered.
- Dont use "filled areas" if possible. It does not make good geometry in flatcam
- Don't forget to set origin marker
- Export gerber: use auxiliary axis
FlatCam
geometry generation:
- If you are using thru-hole components or using bottom layer, mirror around y axis for both geometry and Drilling
- Edit drill files if necessary for fewer drill sizes
- TODO: test double sided layout by mirroring around center axis!
Isolation generation:
-
Current isolation mill depth to test: 0.04 mm (0.05 was tested and seems to work fine!) (Common copper depth is about 0.03 mm)
-
Current feedrate on isolation milling to test: 60 mm/s
-
spindle speed 12000 rpm
-
use 0.2 mm tool width on cnc generation
-
2 passes with 0.1 overlap
Cutout generation:
- Current cutout mill depth: 1.6 mm
- Current feedrate on cutout milling: 40 mm/s
- spindle speed 12000 rpm
FlatCam defaults:
- put a link in ~/.FlatCAM/defaults.json
bCNC
Probe:
- Fastfeed: 120
- Probefeed: 25
- Probe points: 4/cm (in each direction)
Drilling:
- Current drill plunge rate to test 20 mm/s
- spindle speed: 12000 rpm
- Drill depth: 1.6
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | CONN_01X03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | P1 |
| 1 | POT | Potentiometer_THT:Potentiometer_Piher_PC-16_Single_Vertical | RV1 |
More from androiders/pcbs
12- 2 layers58 × 80 mm

- 2 layers

- 2 layers

- 2 layers

- 2 layers65.3 × 48.5 mm

- 2 layers120 × 50.2 mm

- 2 layers

- 2 layers

- 2 layers44 × 50 mm

- 2 layers73.7 × 34.3 mm

- 2 layers

- 2 layers

Similar boards
- 2 layers18.5 × 26 mm

24g2usb rp2350zero
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
4 parts1.7kApache-2.0 - 2 layers116 × 33 mm

- 2 layers19 × 18 mm

Daughter board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
4 parts915 - 2 layers24.8 × 24.8 mm

Nrf24 breakout
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
4 parts803MIT - 2 layers26 × 20 mm

Cap chain
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
4 parts744MIT - 2 layers34.7 × 20 mm

XG Station Power MSI
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
4 parts712CC-BY-4.0 - 2 layers20.3 × 24.5 mm

Jack power input
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
4 parts546MIT - 2 layers35.1 × 92.1 mm

SDEX2M2 MicroSD Express to M.2 NVMe Adapter for Switch 2 WIP
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
4 parts542GPL-3.0
Questions
How big is the Signal mover PCB?
It measures 26.7 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Signal mover use?
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Signal mover KiCad files?
From the androiders/pcbs repository on GitHub, at the commit this page was made from: the board is signal_mover/signal_mover.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Signal mover design in my own project?
Its repository states no licence, so its author keeps all rights: ask androiders before reusing the design.