2 layers49.8 × 52.7 mm
2 layers63.5 × 36.3 mm
PS2 ADB
androda/PCBDesigns21PCB Designs By Androda
- Size
- 63.5 × 36.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 18
- Pads
- 69
- Tracks, vias
- 139, 40
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20220914)
- Created
- 20 Mar 2021
- Updated
- 19 Aug 2023
Overview
PS2 ADB is an open-source printed circuit board by androda, from the androda/PCBDesigns repository on GitHub. It is a 2-layer board of 63.5 × 36.3 mm with 21 parts on 18 nets, routed with 139 tracks and 40 vias.
Its parts include 6 capacitors, 4 connectors, 2 resistors, 2 diodes and 2 fuses. It belongs with the PIC boards of this library.
README
PowerSupplies/LC_I_II_III_Q605_RPT60A/README.mdLicensed Creative Commons Attribution-NonCommercial-ShareAlike 4.0. https://creativecommons.org/licenses/by-nc-sa/4.0/ https://creativecommons.org/licenses/by-nc-sa/4.0/deed.fr
This is a power supply replacement design for the LC I through III series plus Q605. It uses a MeanWell RPT-60A power supply that provides the usual 12/5/-5, with this PCB being effectively a protection board to try and keep your vintage system safe in case of power surges or regulation failures. It's a working design, just move over the power output cable from the original supply (which could need extending).
This design uses the output pads layout from the "MacTX LC" which was released to the public domain. Other than that it's an original design.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 4.7uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5, C6 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 4.7uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | D | Diode_SMD:D_SMA | D2 |
| 1 | D | Diode_THT:D_DO-15_P12.70mm_Horizontal | D1 |
| 1 | DIN-4 | Library:ADB_MDR4_MINI-DIN | J4 |
| 1 | Fuse | Fuse:Fuse_BelFuse_0ZRE0005FF_L8.3mm_W3.8mm | F2 |
| 1 | Fuse | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | KBD | Library:PS2_MDR6_MINI-DIN | J2 |
| 1 | MOUSE | Library:PS2_MDR6_MINI-DIN | J3 |
| 1 | PIC12F1840-IP | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | SW_MEC_5E | Library:SW_SPST_TL3305A | SW1 |
More from androda/PCBDesigns
4- 2 layers68.2 × 50.6 mm
- 2 layers39.1 × 90.6 mm
- 2 layers49.8 × 51.7 mm
Similar boards
- 2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
Questions
How big is the PS2 ADB PCB?
It measures 63.5 × 36.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PS2 ADB use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PS2 ADB KiCad files?
From the androda/PCBDesigns repository on GitHub, at the commit this page was made from: the board is Adapters/PS2_ADB/PS2_ADB.kicad_pcb and its schematic Adapters/PS2_ADB/PS2_ADB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PS2 ADB design in my own project?
Its repository states no licence, so its author keeps all rights: ask androda before reusing the design.