
Coin Cell Tester
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.

Sensor main is an open-source printed circuit board by andriy-bilynskyy, from the andriy-bilynskyy/SmartHouse repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 60 × 50 mm with 18 parts on 37 nets, routed with 138 tracks and 2 vias.
It is built around the DS18B20, B3FS-1000P and CR2477-2, with the IRLML6401 among its other parts. Its parts include 4 resistors, 3 capacitors, 3 ICs, 2 connectors and 2 switches. It belongs with the radio and wireless and sensors and measurement boards and the nRF52 and nRF5x boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100n | Capacitors_SMD:C_0805 | C1 |
| 1 | 10n | Capacitors_SMD:C_0805 | C3 |
| 1 | 220u (RC)6,3*7,7 | Capacitors_SMD:CP_Elec_6.3x7.7 | C2 |
| 1 | 270R | Resistors_SMD:R_0805 | R4 |
| 1 | 2M | Resistors_SMD:R_0805 | R3 |
| 1 | 4.7K | Resistors_SMD:R_0805 | R2 |
| 1 | 47K | Resistors_SMD:R_0805 | R1 |
| 1 | B3FS-1000P | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW1 |
| 1 | CR2477 | Project Lib:CR2477 | B1 |
| 1 | DS18B20 | Housings_SOIC:SO-8_5.3x6.2mm_Pitch1.27mm | U2 |
| 1 | FYLS-0805GD | LEDs:LED_0805 | D1 |
| 1 | IRLML6401 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | KA-80 | Project Lib:KA-80 | SW2 |
| 1 | NRF51822_Eval | Project Lib:NRF51822_Eval | U1 |
| 1 | WATER_SENSOR | Project Lib:WATER_SENSOR | U3 |
| 1 | ZL211-02KG | Project Lib:ZL201-02G | J2 |
| 1 | ZL211-07KG | Project Lib:ZL211-07G | J1 |
The 17 most common of 18 parts.

tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.


jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack


DimitraMTsakiridou/THESIS-UltraLowPower-LoRa-Node
Aiming to address the challenges of remote water quality monitoring and bypass the complexity of standard LoRaWAN networks, this repository contains the from-scratch design, end-to-end implementation, and extensive…



RalfsVetra/stm8sx03k3-dev-board
Development board for the STM8SX03K3 platform.
It measures 60 × 50 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the DS18B20, B3FS-1000P, CR2477-2 and IRLML6401. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the andriy-bilynskyy/SmartHouse repository on GitHub, at the commit this page was made from: the board is sensors/hw/Sensor_main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).