2 layers72.4 × 76.7 mm
4 layers139 × 86.7 mm
14-z80-flash
andrisr223/tinyz80clone1Tiny Z80 clone
- Size
- 139 × 86.7 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 334
- Nets
- 336
- Pads
- 1,330
- Tracks, vias
- 3,323, 417
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Apr 2023
- Updated
- 5 Nov 2023
Overview
14-z80-flash is an open-source printed circuit board by andrisr223, from the andrisr223/tinyz80clone repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 139 × 86.7 mm with 334 parts on 336 nets, routed with 3,323 tracks and 417 vias.
It is built around the SLG46826V, NXS0108PW and CH376S, with the AS6C4008-55STIN, 0402ESDA-05N and BSS138 among its other parts. Its parts include 86 diodes, 82 resistors, 47 capacitors, 11 connectors and 9 ICs. It belongs with the retro computing and games boards of this library.
Main components
8
SLG46826V
STQFN-20(2x3)-40℃~+85℃ 1.71V~2.5V、2.3V~5.5V 13 19 In-system programming Integrated temperature sensor STQFN-20(2x3) Programmable Logic Device (CPLDs/FPGAs) ROHSRenesas ElectronicsProgrammable Logic Device (CPLDs/FPGAs)
NXS0108PW
TSSOP-20LTSSOP-20L Buffers, Drivers, Receivers, Transceivers ROHSMDDBuffers, Drivers, Receivers, Transceivers
CH376S
SOP-28-300mil-40℃~+85℃ 12Mbps 3.3V、5V SPI to USB、UART to USB、Parallel to USB USB 2.0 SOP-28-300mil USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
AS6C4008-55STIN
STSOP-32-11.8mm-40℃~+85℃ 2.7V~5.5V 30mA 4Mbit 4uA 55ns STSOP-32-11.8mm SRAM ROHSAlliance MemorySRAM
0402ESDA-05N
0402-40℃~+85℃ 1.5pF 1nA 50V 5V Bidirectional ESD IEC 61000-4-2 Single-channel 0402 ESD and Surge Protection (TVS/ESD) ROHSBORNESD And Surge Protection (TVS/ESD)
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
CR2032
-- Unclassified goods ROHSMaxellUncategorised
README
README.mdParts
334| Qty | Value | Footprint | References |
|---|---|---|---|
| 81 | 0402ESDA-05N | Diode_SMD:D_0402_1005Metric | D10, D11, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D115, D117, D119 +65 |
| 18 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R17, R18, R19, R20, R21, R22, R23, R24, R28, R29, R40, R41, R103, R104, R105, R106 +2 |
| 18 | U2_10 | footprints:TestPoint_Pad_0.8x0.8mm | TP3, TP4, TP5, TP6, TP13, TP16, TP17, TP18, TP19, TP29, TP30, TP31, TP33, TP34, TP34, TP103 +2 |
| 14 | U2_10 | footprints:TestPoint_Pad_0.8x0.4mm | TP1, TP2, TP10, TP11, TP12, TP22, TP32, TP35, TP36, TP37, TP38, TP39, TP101, TP102 |
| 9 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5, C22, C23, C24, C101, C102, C103, C104 |
| 8 | 0.1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C10, C14, C15, C16, C17, C18, C52 |
| 8 | TestPoint | footprints:TestPoint_Pad_0.8x0.8mm | TP20, TP21, TP23, TP24, TP25, TP26, TP27, TP28 |
| 7 | 0R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R26, R27, R30, R31, R32, R33 |
| 6 | 1u | Capacitor_SMD:C_0402_1005Metric | C45, C46, C47, C48, C49, C50 |
| 5 | 0R | Resistor_SMD:R_0402_1005Metric | R35, R36, R37, R62, R63 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R67, R805, R806, R807 |
| 4 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C37, C38, C39, C40 |
| 4 | 4.7k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R3, R4 |
| 4 | Conn_01x02 | footprints:SlgI2C-Pad0.5x1.5mm | J3, J5, J6, J7 |
| 4 | SLG46826V | footprints:IC_SLG46826V | U4, U7, U10, U11 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R50, R51, R52 |
| 3 | 2.2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R47, R48, R49 |
| 3 | 20k | Resistor_SMD:R_0402_1005Metric | R11, R12, R14 |
| 3 | 4.42K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R42, R43, R44 |
| 3 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R53, R54, R55 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | H1, H2, H4 |
| 3 | NXS0108 | Package_DFN_QFN:WQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x2.9mm | U22, U23, U24 |
| 3 | TX | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | ACT1, D1, TX801 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C804 |
| 2 | 10K/0603 | Resistor_SMD:R_0603_1608Metric | R56, R57 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R16, R34 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20, C21 |
| 2 | 10u | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C2, C4 |
| 2 | 10u | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C54, C55 |
| 2 | 150R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R203, R204 |
| 2 | 1N4148W/SOD123 | Diode_SMD:D_SOD-123 | D201, D202 |
| 2 | 2.2K/0603 | Resistor_SMD:R_0603_1608Metric | R60, R61 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric | R13, R15 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R803, R804 |
| 2 | 270R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R201, R202 |
| 2 | 3 | Diode_SMD:D_MiniMELF | D52, D53 |
| 2 | 33n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C201, C202 |
| 2 | 33p | Capacitor_SMD:C_0603_1608Metric | C32, C33 |
| 2 | 47 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R45, R46 |
| 2 | 47p | Capacitor_SMD:C_0603_1608Metric | C802, C803 |
| 2 | 5K1 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R801, R802 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q401, Q402 |
| 2 | Conn_01x10 | Connector_Molex:Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal | J4, J10 |
| 2 | NA(120R/0603) | Resistor_SMD:R_0603_1608Metric | R58, R59 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP5, JP101 |
| 2 | TODO/2.2K/0603 | Resistor_SMD:R_0603_1608Metric | R38, R501 |
| 2 | U2_10 | TestPoint:TestPoint_Loop_D3.50mm_Drill0.9mm_Beaded | TP14, TP15 |
| 1 | 0.01u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C35 |
| 1 | 0.01u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C36 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 0.5A | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F801 |
| 1 | 1.8432MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X1 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 10MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 12MHz | Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | X2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C41 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R64 |
| 1 | 29.4k | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 2K2 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R205 |
| 1 | 2k | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | 33p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C51 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R66 |
| 1 | 600@600MHz | Resistor_SMD:R_1210_3225Metric | FB1 |
| 1 | AS6C4008-55STIN | Package_SO:TSOP-I-32_12.4x8mm_P0.5mm | U9 |
| 1 | B5819W | Diode_SMD:D_MiniMELF | D802 |
| 1 | Buzzer | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BZ1 |
| 1 | CH376S | footprints:SOP28 | U2 |
| 1 | CR2032 | Battery:BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02_Male | Connector_Molex:Molex_PicoBlade_53048-0210_1x02_P1.25mm_Horizontal | J1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | I2C2 |
| 1 | Conn_01x04_Male | Connector_Molex:Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | I2C1 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | SPI2 |
| 1 | Conn_01x05_Male | Connector_Molex:Molex_PicoBlade_53048-0510_1x05_P1.25mm_Horizontal | SPI1 |
| 1 | Conn_02x04 | Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_Vertical_SMD | J8 |
| 1 | Conn_02x10_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J15 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J9 |
The 300 most common of 334 parts.
More from andrisr223/tinyz80clone
1Similar boards
- 4 layers65 × 56.5 mm
Tangnano9k kr260-hat
calperxd/tangnano9k-kr260-hat
FPGA HAT for the AMD Kria KR260 based on the Tang Nano 9K (Gowin GW1NR-9, FT2232H, 16-bit parallel link on J21): KiCad 10 schematic, 4-layer PCB and JLCPCB production files
181 parts1 - 4 layers55 × 55 mm
- 2 layers57.2 × 19.1 mm
- 2 layers54 × 54 mm
- 2 layers60 × 34 mm
- 6 layers65 × 85 mm
Trackball
efogtech/endgame-trackball-hardware
Because it's cheaper than 4 layers. Yes, seriously.
260 parts26 - 4 layers102.1 × 73.8 mm
Tape Emulator
SteveLRojas/MC-10_Tape_Emulator
Unified HW and SW repository for the TRS-80 MC-10 tape emulator project.
95 parts2 - 6 layers128.3 × 98.3 mm
Questions
How big is the 14-z80-flash PCB?
It measures 139 × 86.7 mm and has 4 copper layers, 4.69 mm thick.
What parts does the 14-z80-flash use?
334 parts, built around the SLG46826V, NXS0108PW, CH376S and AS6C4008-55STIN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 14-z80-flash KiCad files?
From the andrisr223/tinyz80clone repository on GitHub, at the commit this page was made from: the board is KiCad-RevB/14-z80-flash.kicad_pcb and its schematic KiCad-RevB/14-z80-flash.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 14-z80-flash design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).