
Hackholidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Etl module mockup is an open-source printed circuit board by andrewpeck, from the andrewpeck/etl_module_pcb_proto repository on GitHub. It is a 2-layer board of 139.8 × 74.7 mm with 72 parts on 51 nets, routed with 82 tracks and 10 vias.
It is built around the WP7B-S050VA1-R8000. Its parts include 48 capacitors, 6 resistors, 4 ICs and 4 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | 0.1uF | Capacitor_SMD:C_0201_0603Metric | C1, C10, C11, C12, C13, C15, C17, C18, C19, C20, C21, C22, C23, C24, C25, C27 +24 |
| 8 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C14, C16, C26, C28, C38, C40 |
| 4 | ETROCv2 | etl_module_mockup:PCB_ETROC2_test | U1, U2, U3, U4 |
| 3 | 10k | Resistor_SMD:R_0201_0603Metric | R2, R3, R4 |
| 2 | 1.2k 0.5% | Resistor_SMD:R_0201_0603Metric | R5, R6 |
| 2 | WP7B-S040VA1 | etl_module_mockup:WP7B-S040VA1 | J1, J2 |
| 2 | WP7B-S050VA1-R8000 | SamacSys_Parts:WP7BS050VA1R8000 | J1, J2 |
| 1 | 0R | Resistor_SMD:R_0201_0603Metric | R1 |
The 62 most common of 72 parts.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350


skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset



jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
It measures 139.8 × 74.7 mm and has 2 copper layers, 1.6 mm thick.
72 parts, built around the WP7B-S050VA1-R8000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the andrewpeck/etl_module_pcb_proto repository on GitHub, at the commit this page was made from: the board is etl_module_mockup.kicad_pcb and its schematic board_to_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask andrewpeck before reusing the design.