Skip to the content
2 layers39 × 27.3 mmWorkshop, the printed circuit board in 3D

Files for KiCAD

Size
39 × 27.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
9
Pads
30
Tracks, vias
46, 20
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
26 Nov 2021
Updated
31 Oct 2025

Overview

Workshop is an open-source printed circuit board by andrewgreenberg, from the andrewgreenberg/kicad-workshop repository on GitHub, published under the MIT licence. It is a 2-layer board of 39 × 27.3 mm with 14 parts on 9 nets, routed with 46 tracks and 20 vias.

Its parts include 4 resistors, 2 diodes, 1 capacitor, 1 IC and 1 switch.

README

README.md

kicad-workshop

3 hours of fun learning KiCAD!

See the Google Slides for the outline and notes.

This repo also contains:

  • Example .gitignore file
  • DRC files for 2 and 4 layer OSH Park boards
  • Workshop CAD files

Parts

14
QtyValueFootprintReferences
4TestPointTestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mmTP1, TP2, TP3, TP4
210kResistor_SMD:R_0805_2012MetricR1, R2
2330Resistor_SMD:R_0805_2012MetricR3, R4
2REDLED_SMD:LED_0805_2012MetricD1, D2
1300nCapacitor_SMD:C_0805_2012MetricC1
1CR2023 battery holderBattery:BatteryHolder_Keystone_1060_1x2032BT2
1ICM7555xBPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1SW_SPSTButton_Switch_SMD:SW_DIP_SPSTx01_Slide_Omron_A6S-110x_W8.9mm_P2.54mmSW1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Workshop PCB?

It measures 39 × 27.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Workshop use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Workshop KiCad files?

From the andrewgreenberg/kicad-workshop repository on GitHub, at the commit this page was made from: the board is 555-blinky-project/workshop.kicad_pcb and its schematic 555-blinky-project/workshop.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Workshop design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).