2 layers89 × 100 mm
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
132 parts388
2 layers89.3 × 38.1 mm
Media controller
anddani/media-controller1- Size
- 89.3 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 43
- Pads
- 122
- Tracks, vias
- 200, 18
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 May 2020
- Updated
- 23 Jun 2022
Overview
Media controller is an open-source printed circuit board by anddani, from the anddani/media-controller repository on GitHub. It is a 2-layer board of 89.3 × 38.1 mm with 26 parts on 43 nets, routed with 200 tracks and 18 vias.
It is built around the ATMEGA32U4. Its parts include 8 capacitors, 6 switches, 4 resistors, 4 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6 |
| 4 | D | Diode_SMD:D_SOD-123 | D1, D2, D3, D4 |
| 4 | KEYSW | MX_Alps_Hybrid:MXOnly-1U-NoLED | K1, K2, K3, K4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ATMEGA32U4 | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Molex-0548190589 | random-keyboard-parts:Molex-0548190589 | USB1 |
| 1 | Rotary_Encoder | Rotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW2 |
| 1 | SW_PUSH | random-keyboard-parts:SKQG-1155865 | SW1 |
Questions
How big is the Media controller PCB?
It measures 89.3 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Media controller use?
26 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Media controller KiCad files?
From the anddani/media-controller repository on GitHub, at the commit this page was made from: the board is media-controller.kicad_pcb and its schematic media-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Media controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask anddani before reusing the design.
Similar boards
- 2 layers22.9 × 36.7 mm
Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers303.6 × 96.1 mm
- 2 layers114.9 × 77 mm
- 2 layers444.1 × 151.2 mm
Gh80-3003
evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)
287 parts69CC-BY-SA-4.0 - 2 layers232.2 × 76.7 mm
- 2 layers373.2 × 131.8 mm
- 2 layers17.8 × 33 mm
