Skip to the content
2 layers35 × 56 mmPcb be like, the printed circuit board in 3D

GitHub repo of the PCB I made for solder from Hack Club

Size
35 × 56 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
16
Pads
48
Tracks, vias
112, 3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 May 2025
Updated
16 May 2025

Overview

Pcb be like is an open-source printed circuit board by anayksha, from the anayksha/pcb-be-like repository on GitHub. It is a 2-layer board of 35 × 56 mm with 21 parts on 16 nets, routed with 112 tracks and 3 vias.

Its parts include 6 resistors, 6 transistors, 2 switches and 1 capacitor.

README

README.md

pcb-be-like

So this is a really sketchy h-bridge circuit that is capable of running the vibration motor in 2 different directions with 2 different button presses. Yeah, it's kind of useless when it's hooked up to a vibration motor and not an actual motor, but like I wanted to mess around with transistors and I lowk didn't know what else I could make that wasn't too simple nor too complex for me.

Schematic

PCB

I hid the silkscreens over here because it got really cluttered but the silksceens are on the next images


Since the least amount of pcbs I can buy is 5, I wanted to do something with the extras, and so I thought of making the back silkscreen layer some kind of dog tags of Jorge from halo reach.

BOM

  • 1x battery holder
  • 2x push buttons
  • 4x 4.7kΩ resistors
  • 2x 47kΩ resistors
  • 4x NPN transistors
  • 2x PNP transistors
  • 1x 10μF capacitor
  • 1x potentiometer
  • 1x vibration motor

made by @anaykshatriya on slack

Parts

21
QtyValueFootprintReferences
42N3904Package_TO_SOT_THT:TO-92L_HandSolderQ3, Q4, Q5, Q6
44.7kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3, R4
3LOGOLOGOG***, G***, G***
22N3906Package_TO_SOT_THT:TO-92L_HandSolderQ1, Q2
247kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR5, R6
2SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmSW1, SW2
110μFCapacitor_THT:CP_Radial_D8.0mm_P5.00mmC1
1Battery_CellBattery:BatteryHolder_Keystone_3034_1x20mmBT1
1Motor_DCConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalM1
1R_PotentiometerPotentiometer_THT:Potentiometer_Vishay_T73YP_VerticalRV1

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the Pcb be like PCB?

It measures 35 × 56 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pcb be like use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcb be like KiCad files?

From the anayksha/pcb-be-like repository on GitHub, at the commit this page was made from: the board is src/pcb be like.kicad_pcb and its schematic src/pcb be like.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcb be like design in my own project?

Its repository states no licence, so its author keeps all rights: ask anayksha before reusing the design.