
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

GitHub repo of the PCB I made for solder from Hack Club
Pcb be like is an open-source printed circuit board by anayksha, from the anayksha/pcb-be-like repository on GitHub. It is a 2-layer board of 35 × 56 mm with 21 parts on 16 nets, routed with 112 tracks and 3 vias.
Its parts include 6 resistors, 6 transistors, 2 switches and 1 capacitor.
So this is a really sketchy h-bridge circuit that is capable of running the vibration motor in 2 different directions with 2 different button presses. Yeah, it's kind of useless when it's hooked up to a vibration motor and not an actual motor, but like I wanted to mess around with transistors and I lowk didn't know what else I could make that wasn't too simple nor too complex for me.

I hid the silkscreens over here because it got really cluttered but the silksceens are on the next images

Since the least amount of pcbs I can buy is 5, I wanted to do something with the extras, and so I thought of making the back silkscreen layer some kind of dog tags of Jorge from halo reach.

made by @anaykshatriya on slack
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2N3904 | Package_TO_SOT_THT:TO-92L_HandSolder | Q3, Q4, Q5, Q6 |
| 4 | 4.7kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 2N3906 | Package_TO_SOT_THT:TO-92L_HandSolder | Q1, Q2 |
| 2 | 47kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2 |
| 1 | 10μF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | Motor_DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 35 × 56 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the anayksha/pcb-be-like repository on GitHub, at the commit this page was made from: the board is src/pcb be like.kicad_pcb and its schematic src/pcb be like.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask anayksha before reusing the design.