
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

The case is designed using the free and open-source tool OpenSCAD and requires a custom stencil font.
Anavi word clock is an open-source printed circuit board by AnaviTechnology, from the AnaviTechnology/anavi-word-clock repository on GitHub. It is a 2-layer board of 69.8 × 23.9 mm with 12 parts on 20 nets, routed with 46 tracks and 3 vias.
Its parts include 3 resistors, 2 ICs, 2 connectors, 1 diode and 1 switch. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.
Open source 8x8 NeoPixel word clock.
The case is designed using the free and open-source tool OpenSCAD and requires a custom stencil font.
Follow the steps below to install the Arial stencil font on an Ubuntu Linux distribution:
sudo mkdir /usr/share/fonts/anavi
sudo cp Arial-BoldStencila.ttf /usr/share/fonts/anavi
sudo chmod -R --reference=/usr/share/fonts/opentype /usr/share/fonts/anaviNOTE: Root privileges are required to install fonts system-wide.
sudo fc-cache -fvfc-list | grep -i arialThe font should appear in the output list. The font name reported by fc-list must be used exactly in the OpenSCAD text() function.
Restart OpenSCAD if it was already running so it can detect the newly installed font.
The project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).
Note: This is a human-readable summary of (and not a substitute for) the license.
You are free to:
Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
You will have to provide a link to the original creator of the project http://www.anavi.technology on any documentation or website.
Credit can be attributed through a link to the creator website: http://www.anavi.technology
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 68R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 74LVC1G17W5-7 | SOT95P280X145-5N:SOT95P280X145-5N | U2 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | LOGO | logo:anavi-logo | G*** |
| 1 | SW_DIP_x01 | TL1105SF160Q:SW_TL1105SF160Q_EWI | SW1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J7 |
| 1 | XIAO ESP32C6 | xiao-esp32c6:XIAO-ESP32-C6-SMD | U1 |
The 10 most common of 12 parts.
It measures 69.8 × 23.9 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AnaviTechnology/anavi-word-clock repository on GitHub, at the commit this page was made from: the board is pcb/anavi-word-clock.kicad_pcb and its schematic pcb/anavi-word-clock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AnaviTechnology before reusing the design.

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus