2 layers18.5 × 11.1 mm
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
6 parts4.3kMIT
2 layers10.7 × 45.5 mm
Anavi buttons
AnaviTechnology/anavi-buttons4Simple add-on board with 3 buttons for Raspberry Pi and Arduino
- Size
- 10.7 × 45.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 4
- Pads
- 17
- Tracks, vias
- 15, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Jul 2018
- Updated
- 20 Jul 2018
Overview
Anavi buttons is an open-source printed circuit board by AnaviTechnology, from the AnaviTechnology/anavi-buttons repository on GitHub. It is a 2-layer board of 10.7 × 45.5 mm with 6 parts on 4 nets, routed with 15 tracks and 0 vias.
README
README.mdanavi-buttons
Simple add-on board with 3 buttons for Raspberry Pi and Arduino
License
The project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).
Note: This is a human-readable summary of (and not a substitute for) the license.
You are free to:
Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
You will have to provide a link to the original creator of the project http://www.anavi.technology on any documentation or website.
Credit can be attributed through a link to the creator website: http://www.anavi.technology
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | SW_DIP_x01 | Buttons_Switches_ThroughHole:SW_PUSH_6mm_h4.3mm | B1, B2, B3 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mm | J1 |
| 1 | LOGO | logo:anavi-logo | G*** |
The 5 most common of 6 parts.
Similar boards
- 2 layers14.6 × 33 mm
- 2 layers9 × 9 mm
Dpoint
Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements
6 parts1.1kMIT - 2 layers51.5 × 16.6 mm
MicroswitchXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
6 parts1.1kGPL-3.0 - 2 layers21.9 × 76.7 mm
Amiga External
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
6 parts1kGPL-3.0 - 2 layers88.9 × 50.8 mm
Businesscard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
6 parts915 - 2 layers20.3 × 15.2 mm
L0 RGB led
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
6 parts546MIT - 2 layers9 × 3.6 mm
Questions
How big is the Anavi buttons PCB?
It measures 10.7 × 45.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Anavi buttons use?
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Anavi buttons KiCad files?
From the AnaviTechnology/anavi-buttons repository on GitHub, at the commit this page was made from: the board is anavi-buttons.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Anavi buttons design in my own project?
Its repository states no licence, so its author keeps all rights: ask AnaviTechnology before reusing the design.