Skip to the content
2 layers107.5 × 56 mmPondPad, the printed circuit board in 3D

A custom macropad that looks like an arcade

Size
107.5 × 56 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
22
Pads
61
Tracks, vias
92, 6
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Oct 2026
Updated
6 Oct 2026

Overview

PondPad is an open-source printed circuit board by anasluqman089, from the anasluqman089/PondPad repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 107.5 × 56 mm with 12 parts on 22 nets, routed with 92 tracks and 6 vias.

Its parts include 5 switches, 1 IC and 1 connector. It belongs with the keyboards and input and retro computing and games boards and the ESP32 and RISC-V boards of this library.

README

README.md

PondPad

image

Hello Everyone! PondPad is a custom arcade-style macropad built using a Seeed XIAO ESP32-C3. It uses 5 button, a TFT display and Bluetooth for quick shortcut, media, and text actions.

Project contents

Hardware

The current PCB is designed around:

  • 1x Seeed XIAO ESP32-C3-SMD
  • 5x Cherry MX-compatible 1.00u PCB switches
  • 1x 240x320 ST7789-compatible TFT display
  • 1x JST-PH 8-pin display interconnect
  • 1x JST-PH 2-pin battery connector
  • 4x M2 mounting holes

BOM

NameQtyPriceBuy Link
Cherry MX switch5$8.75https://www.aliexpress.com/item/1005002162885278.html
XIAO ESP32-C31$12.00https://www.aliexpress.com/item/1005007469761633.html
JST PH 1x8 PCB mount1~$0.20(Most only sells in pack more than 1)
JST PH 1x2 PCB mount1~$0.20(Most only sells in pack more than 1)
M2 mounting screw4~$0.50(Most only sells in pack more than 4)
240x320 TFT display1$13.00https://www.aliexpress.com/item/1005008772378337.html]
PCB (With Stencil)1$7.80https://www.aliexpress.com/item/1005012672070003.html]
3D Printing1~$10.00-

Firmware

The firmware is written in Arduino C++.

Required libraries

Install the following in the Arduino IDE or PlatformIO:

  • Adafruit_GFX
  • Adafruit_ST7789
  • BleKeyboard
  • Preferences support is built into the ESP32 core

Pin map

The firmware expects the following GPIO assignments:

  • Display backlight: GPIO 2
  • Display reset: GPIO 3
  • Display data/command: GPIO 4
  • Display chip select: GPIO 5
  • Key switches: GPIO 6, 7, 21, 9, 20
  • SPI clock: GPIO 8
  • SPI MOSI: GPIO 10

Operation

The device starts in a menu screen and offers:

  1. Macro pad mode
  2. Fly Catch game
  3. Whack-a-Frog game
  4. Lily Dodge game
  5. High score screen

The macro pad mode sends keyboard shortcuts and media commands over BLE to a paired host.

Images

image

PCB

image image

CAD

image image

Schematic

License

This project is distributed under the repository license. See the LICENSE for details.

Parts

12
QtyValueFootprintReferences
5SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
1BatteryConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalBT1
1Conn_01x08_SocketConnector_JST:JST_PH_S8B-PH-K_1x08_P2.00mm_HorizontalJ1
1XIAO-ESP32-C3-SMDSeeed_Studio_XIAO_Series:XIAO-ESP32-C3-SMDU1

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the PondPad PCB?

It measures 107.5 × 56 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PondPad use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PondPad KiCad files?

From the anasluqman089/PondPad repository on GitHub, at the commit this page was made from: the board is PCB & Schematic/PondPad.kicad_pcb and its schematic PCB & Schematic/PondPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PondPad design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).