2 layers44.3 × 46.3 mm
Catear pcb
TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.
121 parts1
4 layers25.8 × 43.5 mm
- Size
- 25.8 × 43.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 37
- Pads
- 212
- Tracks, vias
- 332, 57
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Dec 2017
- Updated
- 7 May 2019
Overview
Ht-001 is an open-source printed circuit board by anarchyincubator, from the anarchyincubator/hatchtrack repository on GitHub, published under the MIT licence. It is a 4-layer board of 25.8 × 43.5 mm with 52 parts on 37 nets, routed with 332 tracks and 57 vias.
It is built around the CP2102N-A01-GQFN24, BME680 and MCP73831, with the TPD3E001DRY, BAT165A and SS8050 among its other parts. Its parts include 16 capacitors, 14 resistors, 7 ICs, 4 diodes and 3 connectors. It belongs with the ESP32 boards of this library.
Main components
6
CP2102N-A01-GQFN24
QFN-24-EP(4x4)3Mbps 3V~3.6V Transceiver QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB Converters
BME680
LGA-8-40℃~+85℃ 0.12hpa 0.6hpa 1.3pa/K 1.71V~3.6V 150nA 30Kpa~1.1bar I2C、SPI Temperature Sensor LGA-8 Pressure Sensors ROHSBosch SensortecPressure Sensors
MCP73831
UncategorisedMicrochip Technology
TPD3E001DRY
SON-6(1x1.5)-40℃~+85℃ 1.5pF 11V 1nA 5.5A@8/20us 5.5V 90W@8/20us ESD IEC 61000-4-2 Three channels Unidirectional SON-6(1x1.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
BAT165A
SOD3231 Independent 40V 500mA 740mV@750mA 8A 8uA@40V SOD323 Schottky Diodes ROHSNexperiaSchottky Diodes
SS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdhatchtrackv1
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | lib_fp:C_0402 | C4, C8, C10, C12, C13, C14, C15 |
| 6 | 10K | lib_fp:R_0402 | R4, R5, R6, R7, R8, R14 |
| 6 | 4.7uF | lib_fp:C_0402 | C1, C2, C7, C9, C11, C16 |
| 5 | 1K | lib_fp:R_0402 | R1, R3, R9, R10, R11 |
| 4 | DNF | lib_fp:MountingHole_2.7mm_M2.5_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | 1uF | lib_fp:C_0402 | C3, C5, C6 |
| 2 | 0 | lib_fp:R_0402 | R12, R13 |
| 2 | BAT-165 | lib_fp:D_SOD-323 | D1, D5 |
| 2 | SS8050 | TO_SOT:SOT-23 | Q1, Q2 |
| 1 | 5.6k | lib_fp:R_0402 | R2 |
| 1 | BME680 | lib_fp:BME680 | U5 |
| 1 | CP2102N-A01-GQFN24 | lib_fp:QFN-24-1EP_4x4mm_Pitch0.5mm | U1 |
| 1 | CREE_LED_RGB | lib_fp:PLCC4 | D3 |
| 1 | DNF | lib_fp:SolderWirePad_2x_1mmDrill | J2 |
| 1 | DNF | lib_fp:Pin_Header_Straight_1x06_Pitch1.00mm | J3 |
| 1 | ESP32-WROOM-32U (8M) | lib_fp:ESP32-WROOM-32U | U7 |
| 1 | ICM20602 | lib_fp:PQFN50P300X300X80-16N | U6 |
| 1 | LED | lib_fp:LED_0402 | D2 |
| 1 | LOGO | lib_fp:htlogo_big | G*** |
| 1 | LP5912 | lib_fp:WSON-6_2x2mm_Pitch0.65mm | U2 |
| 1 | MCP73831 | lib_fp:SOT-23-5 | U3 |
| 1 | SW_Push | lib_fp:ButtonPads | SW1 |
| 1 | TPD3E001 | lib_fp:TPD3E001_USON_1.45mmx1mm | U4 |
| 1 | USB_A | lib_fp:USB-Micro-B-Molex_105443-1101 | J1 |
Questions
How big is the Ht-001 PCB?
It measures 25.8 × 43.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ht-001 use?
52 parts, built around the CP2102N-A01-GQFN24, BME680, MCP73831 and TPD3E001DRY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ht-001 KiCad files?
From the anarchyincubator/hatchtrack repository on GitHub, at the commit this page was made from: the board is ht-001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ht-001 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers49 × 51.2 mm
- 6 layers230 × 56 mm
- 4 layers100 × 100 mm
ESP32-Eurorack Audio
ctag-fh-kiel/esp32-eurorack-audio
Open source eurorack audio module based on ESP32
173 parts71 - 4 layers160 × 73.2 mm
MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 4 layers69.8 × 69.8 mm
FreeEEG32
neuroidss/FreeEEG32-alpha1.0
ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…
217 parts39AGPL-3.0 - 2 layers136 × 58 mm
- 2 layers35 × 18 mm
