
Joystick 74hc165 input jst
amos42/pcb_joystick_input
Joytsick Input Board for Raspberry Pie (GPIO, 74HC165)

Joytsick Input Board for Raspberry Pie (GPIO, 74HC165)
Arcade input panel support is an open-source printed circuit board by amos42, from the amos42/pcb_joystick_input repository on GitHub. It is a 2-layer board of 117.3 × 103.8 mm with 14 parts on 14 nets, routed with 258 tracks and 16 vias.
It belongs with the retro computing and games boards of this library.
회로도

PCB 이미지 앞면

PCB 이미지 뒷면

샘플 이미지

| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7, J8, J9, J10, J11, J12, J13, J14 |
| 2 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J3, J4 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | Conn_01x14 | Connector_Molex:Molex_PicoBlade_53047-1510_1x15_P1.25mm_Vertical | J2 |
| 1 | Conn_01x15 | Connector_Molex:Molex_PicoBlade_53047-1510_1x15_P1.25mm_Vertical | J1 |

amos42/pcb_joystick_input
Joytsick Input Board for Raspberry Pie (GPIO, 74HC165)

amos42/pcb_joystick_input
Joytsick Input Board for Raspberry Pie (GPIO, 74HC165)

amos42/pcb_joystick_input
Joytsick Input Board for Raspberry Pie (GPIO, 74HC165)

amos42/pcb_joystick_input
Joytsick Input Board for Raspberry Pie (GPIO, 74HC165)

amos42/pcb_joystick_input
Joytsick Input Board for Raspberry Pie (GPIO, 74HC165)

amos42/pcb_joystick_input
Joytsick Input Board for Raspberry Pie (GPIO, 74HC165)

amos42/pcb_joystick_input
Joytsick Input Board for Raspberry Pie (GPIO, 74HC165)

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 117.3 × 103.8 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the amos42/pcb_joystick_input repository on GitHub, at the commit this page was made from: the board is arcade_input_panel_support/arcade_input_panel_support.kicad_pcb and its schematic arcade_input_panel_support/arcade_input_panel_support.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask amos42 before reusing the design.