

Pico w module
- Size
- 80 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 56
- Pads
- 150
- Tracks, vias
- 156, 41
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 3 Apr 2026
- Updated
- 4 Nov 2026
Overview
Pico w module is an open-source printed circuit board by amnessa, from the amnessa/KiCAD repository on GitHub. It is a 4-layer board of 80 × 50 mm with 12 parts on 56 nets, routed with 156 tracks and 41 vias.
It is built around the MAX3485ED, AP2112K-3.3 and ICM-20948, with the INMP441 among its other parts. Its parts include 4 capacitors, 3 ICs, 2 connectors and 1 resistor. It belongs with the RP2040 boards of this library.
Main components
4MAX3485ED
SOP-8-40℃~+85℃ 1 1 10Mbps 1mA 3.135V~3.465V 32 Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTC Korea TAEJIN TechRS-485 / RS-422 ICsAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedICM-20948
QFN-24(3x3)-40℃~+85℃ 0.5KB 1.71V~3.6V 16bit 8uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersINMP441
SMD-960Hz~15kHz SMD-9 MEMS Microphones ROHSTDK InvenSenseMEMS Microphones
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10MicroFarad | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C5 |
| 1 | 120R | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | R1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J2 |
| 1 | ICM-20948 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U2 |
| 1 | INMP441 | INMP441:MIC_INMP441 | MK1 |
| 1 | MAX3485 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | RaspberryPi_Pico_W | Module:RaspberryPi_Pico_W_SMD_HandSolder | A1 |
More from amnessa/KiCAD
1- 2 layers

Similar boards
- 2 layers52 × 43 mm

- 2 layers80 × 50 mm

Ledhub c6
AskAlice/home-automation-pcbs
Daily Kimi-generated home automation PCB designs with KiCad sources, 3D models, and rendered documentation
59 parts1MIT - 2 layers25 × 99.9 mm

PXLstick
VasilKalchev/PXLstick
Board for driving WS281x lights with ESP32 running Aircoookie's WLED firmware
58 parts1MIT - 2 layers86.3 × 76.2 mm

- 2 layers230.8 × 176.5 mm

Marajoara V3
machadoleonardo94/Echoes-of-Termina
ESP32 Audio devkit for I2S modules, with microSD slot and LED outputs
121 parts - 2 layers27.9 × 41.7 mm

Modbus Adapter
tomasmcguinness/esp32-modbus-serial-adapter
The hardware folder contains a KiCad PCB design, designed around the ESP32-C6-MINI-1. Both the antenna and non-antenna (U1) versions will work here due to the location of the ESP32.
23 parts4 - 6 layers133.1 × 133.1 mm

AERIS H743-PCB
7903555032/AERIS-H743-PCB
A 6-layer STM32H743-based embedded development and flight-control/data-logging PCB designed as a practical hardware-design and PCB-layout project.
114 parts1 - 2 layers80 × 50 mm

Questions
How big is the Pico w module PCB?
It measures 80 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Pico w module use?
12 parts, built around the MAX3485ED, AP2112K-3.3, ICM-20948 and INMP441. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pico w module KiCad files?
From the amnessa/KiCAD repository on GitHub, at the commit this page was made from: the board is projects/pico_w_module/pico_w_module.kicad_pcb and its schematic projects/Attiny_light/Attiny_light/Attiny_light.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pico w module design in my own project?
Its repository states no licence, so its author keeps all rights: ask amnessa before reusing the design.