Skip to the content
2 layers45.6 × 42.4 mmQNOB, the printed circuit board in 3D

HID with tactile feedback

Size
45.6 × 42.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
39
Pads
125
Tracks, vias
192, 80
Pours
11
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Mar 2025
Updated
23 Oct 2026

Overview

QNOB is an open-source printed circuit board by alperbasarn, from the alperbasarn/QNOB repository on GitHub. It is a 2-layer board of 45.6 × 42.4 mm with 30 parts on 39 nets, routed with 192 tracks and 80 vias.

It is built around the MT6701QT-STD. Its parts include 10 resistors, 9 capacitors, 3 ICs, 3 connectors and 2 diodes. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

Parts

30
QtyValueFootprintReferences
70Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4, R5, R6, R10
5100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C3, C5, C7, C9
310uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4, C6, C8
34.7kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7, R8, R9
2ESD5ZxxDiode_SMD:D_SOD-323D1, D2
14.7uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2
1Conn_01x03Connector_Molex:Molex_PicoBlade_53048-0310_1x03_P1.25mm_HorizontalJ3
1Conn_01x04Connector_Molex:Molex_PicoBlade_53048-0410_1x04_P1.25mm_HorizontalJ1
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ4
1ESP32-C3_SUPERMINICarriar_boards:MODULE_ESP32-C3_SUPERMINIU2
1LOGOsymbols:bluetooth_2.5mmG***
1LOGOsymbols:usb-cG***
1LOGOsymbols:wifiG***
1MT6701QTPackage_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mmU3
1~Package_DFN_QFN:IC_DRV8311HRRWRU1

More from alperbasarn/QNOB

5
  • 2 layers39.9 × 27.9 mmQNOB V6, the printed circuit board in 3D

    QNOB V6

    alperbasarn/QNOB

    HID with tactile feedback

    182 parts
  • 2 layers48.2 × 33.5 mmQNOB V5, the printed circuit board in 3D

    QNOB V5

    alperbasarn/QNOB

    HID with tactile feedback

    174 parts
  • 2 layers48.2 × 31.5 mmQNOB V5, the printed circuit board in 3D

    QNOB V5

    alperbasarn/QNOB

    HID with tactile feedback

    147 parts
  • 2 layers42.5 × 31.5 mmQNOB V5, the printed circuit board in 3D

    QNOB V5

    alperbasarn/QNOB

    HID with tactile feedback

    107 parts
  • 2 layers32.7 × 42 mmScreenBase V2, the printed circuit board in 3D

    ScreenBase V2

    alperbasarn/QNOB

    HID with tactile feedback

    24 parts

Similar boards

  • 6 layers25.9 × 16.8 mmKnuckle, the printed circuit board in 3D

    Knuckle

    HeyPCB/knuckle

    35 mm round FOC driver for a GBM2804 gimbal motor that answers on the Open Duck Mini's servo bus as an STS3215. 6-layer KiCad 10 board plus printed standoff, cover and horn adapter.

    45 parts1CERN-OHL-S-2.0
  • 4 layers67.4 × 67.4 mmSCLF Gripper, the printed circuit board in 3D

    SCLF Gripper

    Tknika-SCLF/sclf-gripper

    Deskargatu eta instalatu Antigravity bere webgune ofizialetik. VSCode/Windsurf-en fork bat da eta modu berean funtzionatzen du.

    78 parts1
  • 2 layers23.1 × 23.1 mmMT6701, the printed circuit board in 3D

    MT6701

    Ethancao123/Motor-Mounted-Position-Sensor

    AS5048 Breakout PCB for 18XX - 20XX Brushless motors

    9 partsMIT
  • 2 layers239.2 × 168.7 mmBLDC in Pieces, the printed circuit board in 3D

    BLDC in Pieces

    hlord2000/BLDC_in_Pieces

    82 parts
  • 2 layers21 × 17 mmEncoder SPI MT6701, the printed circuit board in 3D

    Encoder SPI MT6701

    runger1101001/Magnetic_Encoders

    Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

    11 parts11
  • 2 layers23.3 × 23.2 mmMagEncoder, the printed circuit board in 3D

    MagEncoder

    Ethancao123/ECE395

    8 parts

Questions

How big is the QNOB PCB?

It measures 45.6 × 42.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the QNOB use?

30 parts, built around the MT6701QT-STD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the QNOB KiCad files?

From the alperbasarn/QNOB repository on GitHub, at the commit this page was made from: the board is V11/V11.kicad_pcb and its schematic PCB/V3/LiPoBase/LiPoBase/LiPoBase.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the QNOB design in my own project?

Its repository states no licence, so its author keeps all rights: ask alperbasarn before reusing the design.