
ETBC 2020
align-racing-uia/electronic_throttle_controller
This is the repository for Align Racing's formula student race car's different systems.

This is the repository for Align Racing's formula student race car's different systems.
ETBC 2020 is an open-source printed circuit board by align-racing-uia, from the align-racing-uia/electronic_throttle_controller repository on GitHub. It is a 2-layer board of 48 × 82.4 mm with 45 parts on 50 nets, routed with 330 tracks and 42 vias.
It is built around the MC33931EK, RB521VM-40TE-17 and NDS356AP, with the WNS20S100CBJ among its other parts. Its parts include 12 capacitors, 11 resistors, 6 diodes, 2 ICs and 1 transistor.
This is the repository for Align Racing's formula student race car's different systems.
Align Racing UiA (AR) is a multidisciplinary student organisation at The University of Agder (UiA), that take part in the world’s largest yearly engineering competition; Formula Student (FS). The organisation continuously consists of around 60 students, from a wide variety of disciplines. The competition includes developing, building, budgeting and marketing a small scale formula type racing car. AR takes this a bit further by having more focus on developing a strong organisation, open for all disciplines, that gives the members a taste of future work-life.
All content included in this Git repository is under the license:
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
You are free to:
Under the following terms:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R9, R10, R11 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C5, C11 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7, R8 |
| 2 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6, C8 |
| 2 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder | C12, C13 |
| 2 | 220uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C3, C9 |
| 2 | 8K2 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2 |
| 2 | RB521VM-40TE-17 | Diode_SMD:D_SOD-323F | D3, D5 |
| 1 | 0.033uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C10 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4 |
| 1 | 255 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | ACM_2020 | ETBC_2020:ACM_2020_Footprint_wo_silk | U1 |
| 1 | Conn_02x09_Top_Bottom | ETBC_2020:JAE_MX23A18NF1 | J1 |
| 1 | D1 | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP4 |
| 1 | D2 | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP3 |
| 1 | Feed | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP5 |
| 1 | Flag | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP6 |
| 1 | Green | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | MC33931EK | ETBC_2020:SOP65P1030X245-33N | IC1 |
| 1 | NDS356AP | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | PWM10 | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP2 |
| 1 | PWM10_Motor | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP10 |
| 1 | PWM3 | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP1 |
| 1 | PWM3_Motor | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP9 |
| 1 | Red | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D6 |
| 1 | TPS1F | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP7 |
| 1 | TPS2F | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP8 |
| 1 | WNS20S100CB | Package_TO_SOT_SMD:TO-263-3_TabPin2 | D1 |
| 1 | Yellow | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4 |

align-racing-uia/electronic_throttle_controller
This is the repository for Align Racing's formula student race car's different systems.

esden/mcHF-kicad
This repository contains the KiCad import of the Altium design files for the mcHF QRP radio.


imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro


makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!


peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project

tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
It measures 48 × 82.4 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the MC33931EK, RB521VM-40TE-17, NDS356AP and WNS20S100CBJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the align-racing-uia/electronic_throttle_controller repository on GitHub, at the commit this page was made from: the board is etbc_pcb/etbc_2020/ETBC_2020.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask align-racing-uia before reusing the design.