
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

learning to create macro pads by designing pcbs in kicad and desining closures in fusion 360
Test keyboard1 is an open-source printed circuit board by AliEmam2, from the AliEmam2/micropad-1-test repository on GitHub. It is a 2-layer board of 141.7 × 70 mm with 32 parts on 37 nets, routed with 242 tracks and 12 vias.
Its parts include 13 diodes, 13 switches, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | ~ | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 9 | ~ | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | S1, S2, S3, S4, S5, S6, S7, S8, S9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW1, SW2, SW3, SW4 |
| 1 | Arduino_Pro_Micro | ScottoKeebs_MCU:Arduino_Pro_Micro | U1 |
| 1 | OLED_128x64 | ScottoKeebs_Components:OLED_128x64 | J2 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

swharden/AVR-projects
A collection of standalone AVR projects written in C

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
It measures 141.7 × 70 mm and has 2 copper layers, 1.6 mm thick.
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AliEmam2/micropad-1-test repository on GitHub, at the commit this page was made from: the board is test-keyboard1.kicad_pcb and its schematic test-keyboard1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AliEmam2 before reusing the design.