
Europi surface mount
Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

Autonomous Robot based on STM32f407
Carte Servo is an open-source printed circuit board by ALICHOUCHENE, from the ALICHOUCHENE/Cassini repository on GitHub. It is a 2-layer board of 69.6 × 43.7 mm with 27 parts on 15 nets, routed with 75 tracks and 0 vias.
It is built around the L7805. Its parts include 10 connectors, 5 capacitors, 4 ICs and 4 diodes. It belongs with the robots and motor control boards of this library.
Autonomous robot based on STM32f407

| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2, C3, C4, C5, Ce |
| 4 | D_Schottky | Diode_THT:D_A-405_P12.70mm_Horizontal | D1, D2, D3, D4 |
| 4 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1, U2, U3, U4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 1 | Input Voltage (Up to 36V) | TerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-Degree | J1 |
| 1 | PWM signal from MCU | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J10 |
| 1 | Servo1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Servo2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Servo3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Servo4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Servo5 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Servo6 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Servo7 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Servo8 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |

Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.


Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover

starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

Redherring32/OpenTendo-TopLoader
An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)
It measures 69.6 × 43.7 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ALICHOUCHENE/Cassini repository on GitHub, at the commit this page was made from: the board is Servo Motors power board/Carte-Servo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ALICHOUCHENE before reusing the design.