2 layers50 × 100 mm
Theremin
harrydshill/LittleTheremin
A small fully-analogue theremin, with pitch and volume control
115 parts
2 layers68 × 128.5 mm
Sil
algesten/silEurorack filter module based on Mutable Instruments Ripples
- Size
- 68 × 128.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 140
- Nets
- 98
- Pads
- 416
- Tracks, vias
- 762, 216
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Feb 2022
- Updated
- 4 Feb 2022
Overview
Sil is an open-source printed circuit board by algesten, from the algesten/sil repository on GitHub. It is a 2-layer board of 68 × 128.5 mm with 140 parts on 98 nets, routed with 762 tracks and 216 vias.
It is built around the OPA1679ID, LM13700M and MMBT3906. Its parts include 62 resistors, 44 capacitors, 9 ICs, 9 connectors and 6 diodes.
Main components
3
OPA1679ID
SOIC-14-18V~-2.25V、2.25V~18V、4.5V~36V -40℃~+85℃ 0.0001% 2.5mA 4-Channel ESD protection SOIC-14 Audio Amplifiers ROHSTexas InstrumentsAudio Amplifiers
LM13700M
SOIC-16-16V~-4.75V、4.75V~16V 0℃~+70℃ 110dB 2 2.6mA 20mA 400nA 4mV 50V/us 600nA 9.5V~32V SOIC-16 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
MMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
Parts
140| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 33.2k | Resistor_SMD:R_0402_1005Metric | R1, R2, R13, R15, R20, R25, R26, R34, R35, R37, R39, R42, R44, R45, R46, R48 +8 |
| 16 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C7, C11, C12, C15, C18, C19, C20, C23, C24, C28, C29, C41, C42, C43, C44 |
| 12 | 560pF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C5, C21, C22, C25, C30, C36, C37, C38, C39 |
| 8 | 220pF | Resistor_SMD:R_0603_1608Metric | C8, C9, C13, C14, C32, C33, C34, C35 |
| 8 | 510 | Resistor_SMD:R_0402_1005Metric | R3, R4, R6, R11, R52, R53, R54, R55 |
| 6 | 100k | Resistor_SMD:R_0402_1005Metric | R17, R24, R30, R36, R40, R64 |
| 4 | 1.50k | Resistor_SMD:R_0402_1005Metric | R22, R27, R56, R59 |
| 4 | 1N4148 | Diode_SMD:D_SOD-523 | D3, D4, D5, D6 |
| 4 | 51k | Resistor_SMD:R_0402_1005Metric | R10, R14, R32, R33 |
| 3 | 22pF | Capacitor_SMD:C_0402_1005Metric | C26, C27, C31 |
| 3 | OPA1679 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | IC2, IC7, IC9 |
| 2 | 16.2k | Resistor_SMD:R_0402_1005Metric | R18, R38 |
| 2 | 1N5819 | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | 22k | Resistor_SMD:R_0402_1005Metric | R9, R31 |
| 2 | 22uF | Capacitor_SMD:CP_Elec_5x5.4 | C6, C10 |
| 2 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C16, C40 |
| 2 | 5k | Eurocad:bourns trimpot | R23, R41 |
| 2 | 820 | Resistor_SMD:R_0402_1005Metric | R19, R21 |
| 2 | FerriteBead | Resistor_SMD:R_0402_1005Metric | L1, L2 |
| 2 | LM4040B10 | Package_TO_SOT_SMD:SOT-23 | IC3, IC4 |
| 2 | M3 | Eurocad:M3 Screw | Screw1, Screw2 |
| 2 | MMBT3906 | Package_TO_SOT_SMD:SOT-523 | Q1, Q2 |
| 2 | V2164SZ | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | IC1, IC8 |
| 1 | 1.0k | Resistor_SMD:R_0603_1608Metric | R67 |
| 1 | 100k | Eurocad:bourns trimpot | R43 |
| 1 | 30k | Resistor_SMD:R_0402_1005Metric | R60 |
| 1 | 4.7uF | Resistor_SMD:R_1206_3216Metric | C17 |
| 1 | 68k | Resistor_SMD:R_0402_1005Metric | R47 |
| 1 | AUDIO IN | Eurocad:PJ301M-12 | J4 |
| 1 | AUDIO OUT | Eurocad:PJ301M-12 | J9 |
| 1 | CV IN HP | Eurocad:PJ301M-12 | J7 |
| 1 | CV IN LP | Eurocad:PJ301M-12 | J5 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x08_Female | Connector_PinSocket_2.54mm:PinSocket_1x11_P2.54mm_Vertical | J2 |
| 1 | Conn_01x11_Male | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J1 |
| 1 | FREQ HP 10kB | Eurocad:Alpha9mmPot | R28 |
| 1 | FREQ LP 10kB | Eurocad:Alpha9mmPot | R16 |
| 1 | LM13700 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | IC5 |
| 1 | LOGO | LOGO | G*** |
| 1 | M05X2SHD | Eurocad:Power_small | JP1 |
| 1 | RESO HP 10kB | Eurocad:Alpha9mmPot | R12 |
| 1 | RESO IN HP | Eurocad:PJ301M-12 | J6 |
| 1 | RESO IN LP | Eurocad:PJ301M-12 | J3 |
| 1 | RESO LP 10kB | Eurocad:Alpha9mmPot | R29 |
| 1 | TL074 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | IC6 |
| 1 | mbot | Eurocad:Mounting hole | Mount2 |
| 1 | mtop | Eurocad:Mounting hole | Mount1 |
Questions
How big is the Sil PCB?
It measures 68 × 128.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sil use?
140 parts, built around the OPA1679ID, LM13700M and MMBT3906. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sil KiCad files?
From the algesten/sil repository on GitHub, at the commit this page was made from: the board is sil.kicad_pcb and its schematic sil.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sil design in my own project?
Its repository states no licence, so its author keeps all rights: ask algesten before reusing the design.
Similar boards
- 2 layers27.9 × 101.6 mm
MFOS Eight Stage Phase Shifter - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules
105 parts166MIT - 2 layers70.5 × 128.3 mm
- 2 layers80.9 × 108.2 mm
- 2 layers104 × 158 mm
- 2 layers29.5 × 108.6 mm
MiniDJ Back
Thorinair/Avalon-Harmonics
A collection of Avalon Harmonics branded synthesizer modules.
185 parts26CC-BY-SA-4.0 - 2 layers65 × 106.5 mm
- 2 layers29.2 × 109.2 mm
