Skip to the content
2 layers15.6 × 20.5 mmBreakout, the printed circuit board in 3D

KiCad symbol, footprint, and 3D model for the PixArt PAJ7025 R2 and R3 multiple-object tracking sensor module.

Size
15.6 × 20.5 mm
Copper layers
2
Thickness
0.8 mm
Parts
5
Nets
19
Pads
37
Tracks, vias
43, 13
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
18 Jul 2026
Updated
7 Sep 2026

Overview

Breakout is an open-source printed circuit board by alextrical, from the alextrical/PAJ7025-KiCad-Library repository on GitHub. It is a 2-layer board of 15.6 × 20.5 mm with 5 parts on 19 nets, routed with 43 tracks and 13 vias.

Its parts include 2 capacitors, 1 IC and 1 connector. It belongs with the interfaces and adapters and sensors and measurement boards of this library.

README

README.md

PAJ7025R2 KiCad Library

KiCad library for the PixArt PAJ7025R2 multiple-object tracking sensor module, including a schematic symbol, PCB footprint, and 3D model for public hardware projects. The PAJ7025R2 is a Module-20pins part with an integrated CMOS image sensor, onboard DSP, and SPI interface.[1]

Overview

This repository provides the core library assets needed to use the PixArt PAJ7025R2 in KiCad:

  • Schematic symbol
  • PCB footprint
  • 3D model
  • Optional example project files for validation

The sensor is designed for multiple-object tracking applications and can report object features such as center coordinates, area, boundaries, brightness, radius, range, and aspect ratio over SPI.[1] According to the datasheet, it supports up to 16 tracked objects, a programmable frame rate from 10 fps to 200 fps, and a main supply range of 2.0 V to 3.6 V.[1]

Features

  • Public-ready KiCad symbol for PAJ7025R2 pin mapping.
  • Footprint based on the datasheet module pinout and mechanical outline.[1]
  • 3D model for PCB and enclosure fit checks.
  • Suitable for custom tracking hardware, research boards, and breakout designs.
  • Straightforward integration into project or global KiCad libraries.

Device details

The PAJ7025R2 uses a 98 x 98 pixel black-and-white image sensor with 8-bit depth and a global shutter architecture.[1] PixArt specifies SPI communication up to 14 MHz and programmable gain and exposure settings in the datasheet.[1] The module also includes an IR pass filter intended for IR tracking applications.[1]

Pinout

The library should follow the datasheet pin names and pin functions below.[1]

PinNameFunction
1G0Key scan, leave floating.[1]
2G1Key scan, leave floating.[1]
3G2Key scan, leave floating.[1]
4G3Key scan, leave floating.[1]
5G4Key scan, leave floating.[1]
6G5Key scan, leave floating.[1]
7G6Key scan, leave floating.[1]
8G7Key scan, leave floating.[1]
9G8Key scan output, leave floating.[1]
10G9/CSBSPI chip select, active low.[1]
11G10/SCKSPI clock.[1]
12G11/MISOSPI data output.[1]
13G12/MOSISPI data input.[1]
14VSSDGround.[1]
15CP_1Reserved, leave floating.[1]
16CP_2Reserved, leave floating.[1]
17VDDMAPower input, 2.0 V to 3.6 V.[1]
18G14/LED_FRTReserved LED control pin.[1]
19G13/LED_SIDEReserved LED control pin.[1]
20VSSD_LEDGround.[1]

Repository layout

text
PAJ7025R2-KiCad-Library/
├── PAJ7025R2.kicad_sym
├── PAJ7025R2.pretty/
│   └── PAJ7025R2_Module_20Pin.kicad_mod
├── PAJ7025.3dshapes/
│   └── PAJ7025R2_Module_20Pin.step
├── examples/
│   └── breakout/
├── datasheet/
│   └── PAJ7025R2.pdf
└── README.md

Usage

  1. Add PAJ7025R2.kicad_sym to your project or global symbol libraries.
  2. Add the PAJ7025R2.pretty directory to your KiCad footprint library table.
  3. Assign the PAJ7025R2 symbol to the included footprint.
  4. Link the STEP model from PAJ7025.3dshapes for 3D preview and MCAD export.

Design considerations

The part should be modeled as a sensor module, not a generic IC package, because the datasheet defines it as a 20-pin module with a lens assembly and a specified outline drawing.[1] For a public library, it is worth keeping the optical center, lens body clearance, and height envelope accurate so the part is useful for enclosure and alignment work as well as electrical capture. A public PAJ7025R2 integration example is available in Bart Trzynadlowski's PixArt repository, which includes KiCad PCB design files and a working hardware setup.[2]

Verification

Recommended checks before tagging a release:

  • Verify all pin names and pin types against the datasheet table.[1]
  • Confirm pad spacing and overall body dimensions against the mechanical drawing.[1]
  • Confirm 3D model alignment with the footprint origin and lens location.
  • Run a simple breakout or test board through KiCad DRC and 3D viewer.

License

A permissive license such as MIT or CERN-OHL-P is a practical choice for a public hardware library repository.

References

  • PixArt PAJ7025R2 General Product Datasheet.[1]
  • Bart Trzynadlowski, PixArt PAJ7025R2 reference project with KiCad PCB files.[2]

Parts

5
QtyValueFootprintReferences
1100nCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1
110uLibrary:CP_Radial_D6.3mm_P2.50mm_P5.00mmC2
1Conn_01x06Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_VerticalJ1
1MountingHoleMountingHole:MountingHole_3.2mm_M3H1
1PAJ7025R2PAJ7025:PAJ7025R2_Module_20PinU1

More from alextrical/PAJ7025-KiCad-Library

1
  • 2 layers12.1 × 20 mmBreakout, the printed circuit board in 3D

    Breakout

    alextrical/PAJ7025-KiCad-Library

    KiCad symbol, footprint, and 3D model for the PixArt PAJ7025 R2 and R3 multiple-object tracking sensor module.

    4 parts

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Breakout PCB?

It measures 15.6 × 20.5 mm and has 2 copper layers, 0.8 mm thick.

What parts does the Breakout use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Breakout KiCad files?

From the alextrical/PAJ7025-KiCad-Library repository on GitHub, at the commit this page was made from: the board is examples/R2_breakout/breakout.kicad_pcb and its schematic examples/R2_breakout/breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask alextrical before reusing the design.