

Full Hydration Station
- Size
- 118.3 × 70.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 67
- Pads
- 151
- Tracks, vias
- 105, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Sep 2026
- Updated
- 11 Sep 2026
Overview
Full Hydration Station is an open-source printed circuit board by alexjaber, from the alexjaber/Hydration_Station repository on GitHub. It is a 2-layer board of 118.3 × 70.9 mm with 36 parts on 67 nets, routed with 105 tracks and 0 vias.
It is built around the IRLZ44N. Its parts include 12 connectors, 11 resistors, 2 capacitors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R4, R5, R6, R7, R10, R11 |
| 5 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6, J7, J8, J9 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R8, R9 |
| 3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J3 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 1 | 0.1uf | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | 0.33 uf | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C2 |
| 1 | Arduino_Nano | Module:Arduino_Nano | U1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J13 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | Solenoid Valve Soap | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J12 |
| 1 | Solenoid Valve Water | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J11 |
| 1 | U2 | HYSTA_Footprints:ESP32 | ESP-32D1 |
Similar boards
- 2 layers304.8 × 170.8 mm

- 2 layers94 × 79 mm

- 2 layers

Morpheus kicad
pscrespo/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec
66 parts80GPL-3.0 - 2 layers100 × 100 mm

- 2 layers157.5 × 97.8 mm

Esp32PrinterController
MitchBradley/Esp32PrinterController
PCB design for 3D printer controller using ESP32 processor
101 parts16MIT - 2 layers99.1 × 99.1 mm

- 2 layers64.8 × 109.2 mm

Dmx ledstrip dimmer-32ch
robinolejnik/dmx-ledstrip-dimmer-32ch
Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.
105 parts14MIT - 2 layers101.6 × 53.3 mm

BatteryAnalyzer MkII
Moragor/BatteryAnalyzer_MkII
Updated Version of the battery analyzer, now with constant current
25 parts12MIT
Questions
How big is the Full Hydration Station PCB?
It measures 118.3 × 70.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Full Hydration Station use?
36 parts, built around the IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Full Hydration Station KiCad files?
From the alexjaber/Hydration_Station repository on GitHub, at the commit this page was made from: the board is Hydration Station Circuit/Full Hydration Station.kicad_pcb and its schematic Hydration Station Circuit/Full Hydration Station.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Full Hydration Station design in my own project?
Its repository states no licence, so its author keeps all rights: ask alexjaber before reusing the design.