Skip to the content
2 layers118.3 × 70.9 mmFull Hydration Station, the printed circuit board in 3D

Full Hydration Station

alexjaber/Hydration_Station
Size
118.3 × 70.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
67
Pads
151
Tracks, vias
105, 0
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
11 Sep 2026
Updated
11 Sep 2026

Overview

Full Hydration Station is an open-source printed circuit board by alexjaber, from the alexjaber/Hydration_Station repository on GitHub. It is a 2-layer board of 118.3 × 70.9 mm with 36 parts on 67 nets, routed with 105 tracks and 0 vias.

It is built around the IRLZ44N. Its parts include 12 connectors, 11 resistors, 2 capacitors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

36
QtyValueFootprintReferences
810KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R4, R5, R6, R7, R10, R11
5Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5, J6, J7, J8, J9
4MountingHole_PadMountingHole:MountingHole_4.3mm_M4_DIN965_Pad_TopBottomH1, H2, H3, H4
3220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R8, R9
3Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J2, J3
21N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2
2IRLZ44NPackage_TO_SOT_THT:TO-220-3_VerticalQ1, Q2
10.1ufCapacitor_THT:CP_Radial_D4.0mm_P1.50mmC1
10.33 ufCapacitor_THT:CP_Radial_D4.0mm_P1.50mmC2
1Arduino_NanoModule:Arduino_NanoU1
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_HorizontalJ13
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU3
1Solenoid Valve SoapTerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_HorizontalJ12
1Solenoid Valve WaterTerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_HorizontalJ11
1U2HYSTA_Footprints:ESP32ESP-32D1

Similar boards

  • 2 layers304.8 × 170.8 mm00Key, the printed circuit board in 3D

    00Key

    ZeroZeroOne-dev/00Key

    00Key a 75% keyboard

    268 parts241GPL-3.0
  • 2 layers94 × 79 mm5 - Lizard Car, the printed circuit board in 3D

    5 - Lizard Car

    TRD-B/Lizard

    3D printed RC race car with custom electronics

    54 parts129CC-BY-4.0
  • 2 layersMorpheus kicad, the printed circuit board in 3D

    Morpheus kicad

    pscrespo/Morpheus-STM32

    A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec

    66 parts80GPL-3.0
  • 2 layers157.5 × 97.8 mmEsp32PrinterController, the printed circuit board in 3D

    Esp32PrinterController

    MitchBradley/Esp32PrinterController

    PCB design for 3D printer controller using ESP32 processor

    101 parts16MIT
  • 2 layers99.1 × 99.1 mmFlipDotDriver, the printed circuit board in 3D

    FlipDotDriver

    bitluni/FlippyFlip

    49 parts14
  • 2 layers64.8 × 109.2 mmDmx ledstrip dimmer-32ch, the printed circuit board in 3D

    Dmx ledstrip dimmer-32ch

    robinolejnik/dmx-ledstrip-dimmer-32ch

    Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.

    105 parts14MIT
  • 2 layers101.6 × 53.3 mmBatteryAnalyzer MkII, the printed circuit board in 3D

    BatteryAnalyzer MkII

    Moragor/BatteryAnalyzer_MkII

    Updated Version of the battery analyzer, now with constant current

    25 parts12MIT

Questions

How big is the Full Hydration Station PCB?

It measures 118.3 × 70.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Full Hydration Station use?

36 parts, built around the IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Full Hydration Station KiCad files?

From the alexjaber/Hydration_Station repository on GitHub, at the commit this page was made from: the board is Hydration Station Circuit/Full Hydration Station.kicad_pcb and its schematic Hydration Station Circuit/Full Hydration Station.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Full Hydration Station design in my own project?

Its repository states no licence, so its author keeps all rights: ask alexjaber before reusing the design.