2 layers50 × 35 mm
2 layers56.5 × 69.9 mm
2floor for orange pi
alexeyavb/Orangeblock2Orange pi i2s-i2s bridge hat for use as simple pedalboard. ultra low cost with Orange Pi PC/ONE, STM32 F411, PCM5102, PCM1808
- Size
- 56.5 × 69.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 60
- Pads
- 144
- Tracks, vias
- 573, 88
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Oct 2024
- Updated
- 20 Dec 2024
Overview
2floor for orange pi is an open-source printed circuit board by alexeyavb, from the alexeyavb/Orangeblock repository on GitHub, published under the MIT licence. It is a 2-layer board of 56.5 × 69.9 mm with 17 parts on 60 nets, routed with 573 tracks and 88 vias.
Its parts include 16 connectors and 1 IC. It belongs with the STM32 boards of this library.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SPI5 Header | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J13, J14, J15, J16 |
| 1 | +3V3 Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | +5V Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | GND Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | I2S1 DAC Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | I2S2 ADC Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J3 |
| 1 | OPI Conn Debug Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | OPI Conn Debug Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | OPI SPI0 Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | Orange_PI_PC_ONE_40Pin_Header | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | ST7735 Header | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J12 |
| 1 | STM32 DEBUG Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | STM32 GPIO Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J17 |
| 1 | ~ | STM32PILLS:STM32_WeActSt_BlackPill | U1 |
Questions
How big is the 2floor for orange pi PCB?
It measures 56.5 × 69.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 2floor for orange pi use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2floor for orange pi KiCad files?
From the alexeyavb/Orangeblock repository on GitHub, at the commit this page was made from: the board is 2floor_for_orange_pi.kicad_pcb and its schematic 2floor_for_orange_pi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2floor for orange pi design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
