Skip to the content
2 layers90 × 65 mmEsp32-s3-url caster carrier, the printed circuit board in 3D

Esp32-s3-url caster carrier

AlexDoratu/auto-cast1

Auto DLNA/AirPlay device scanner and caster

Size
90 × 65 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
12
Pads
66
Tracks, vias
45, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
8 May 2026
Updated
6 Jun 2026

Overview

Esp32-s3-url caster carrier is an open-source printed circuit board by AlexDoratu, from the AlexDoratu/auto-cast repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 65 mm with 10 parts on 12 nets, routed with 45 tracks and 0 vias.

Its parts include 4 connectors and 1 capacitor. It belongs with the ESP32 boards of this library.

README

hardware/kicad/esp32-s3-url-caster-carrier/README.md

ESP32-S3 URL Caster Carrier PCB

This folder contains a first-pass KiCad PCB for the firmware/esp32-url-caster hardware target in this repo.

Files

  • esp32-s3-url-caster-carrier.kicad_pcb: carrier board PCB layout draft

What This PCB Assumes

  • The main controller is an ESP32-S3-DevKitC-1 style development board
  • The dev board plugs into two 1x22, 2.54 mm female headers
  • Header row spacing is 25.40 mm
  • The dev board length reference used for placement is 62.74 mm
  • External peripherals connect through simple pin headers:
    • J2: EC11 encoder header
    • J4: ST7735 TFT header
    • JP1: backlight select jumper

Current Status

This is a practical first draft, not a production-frozen PCB:

  • board outline, mounting holes, sockets, headers, jumper, and decoupling cap are placed
  • the required firmware nets are routed
  • unused ESP32 dev board pins are present mechanically but intentionally left unconnected
  • no schematic file has been created yet

Before Fabrication

Please verify these items against your exact hardware:

  • the exact ESP32-S3-DevKitC-1 variant and socket height
  • your TFT module's real pin order and header location
  • your EC11 module or panel encoder footprint needs
  • enclosure and USB connector clearance
  • whether you want a shunt jumper, solder jumper, or transistor backlight driver

Reference Sources

Parts

10
QtyValueFootprintReferences
4M3AutoCast:MountingHole_3.2mm_M3H1, H2, H3, H4
1100nFAutoCast:C_THT_P2.54mmC1
1BL_SELAutoCast:Header_1x3_P2.54mm_THTJP1
1EC11AutoCast:Header_1x5_P2.54mm_THTJ2
1ESP32_J1AutoCast:Socket_1x22_P2.54mm_THTJ1
1ESP32_J3AutoCast:Socket_1x22_P2.54mm_THTJ3
1ST7735_TFTAutoCast:Header_1x8_P2.54mm_THTJ4

Similar boards

  • 2 layers57 × 55.2 mmLogicAnalyzer, the printed circuit board in 3D

    LogicAnalyzer

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    10 parts5.1kGPL-3.0
  • 2 layers32.2 × 15.4 mmProtector, the printed circuit board in 3D

    Protector

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    10 parts4.3kMIT
  • 2 layers26 × 18 mmConn, the printed circuit board in 3D

    Conn

    yaqwsx/KiKit

    Automation tools for KiCAD

    10 parts2.1kMIT
  • 2 layers44.3 × 30.5 mmLime2-SATA RevA, the printed circuit board in 3D

    Lime2-SATA RevA

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    10 parts1.5k
  • 2 layers17.8 × 43.2 mmNano Adapter, the printed circuit board in 3D

    Nano Adapter

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    10 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    10 parts1kGPL-3.0

Questions

How big is the Esp32-s3-url caster carrier PCB?

It measures 90 × 65 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp32-s3-url caster carrier use?

10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32-s3-url caster carrier KiCad files?

From the AlexDoratu/auto-cast repository on GitHub, at the commit this page was made from: the board is hardware/kicad/esp32-s3-url-caster-carrier/esp32-s3-url-caster-carrier.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32-s3-url caster carrier design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).